Sand Rail
#1
Junior Member
Thread Starter
Join Date: Jan 2014
Location: Ann Arbor, Mi
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Sand Rail
OK, i think this is the wrong section but i dont know how to post elese ware as i am new. Im looking into getting ither a 12a or 13b for my sand rail to replace the blown vw 1600cc. I seem to be able to find blown 12as ( or ones that havent run in 2 years) or 13BS. however i ned it to be carbd so i am wondering both how hard is it to rebuild a 12a? and how hard is it to convert a 13b to carbs?
thanks guys!
thanks guys!
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
As long as you do not try to buy anything in this section the Thread will remain open.
Now,13b Engines can be converted to Carb easily.You can get the aftermarket manifolds and block off the oil injection ports ( if the engine was EFI originally).
I'm EFI so I can tell you about the Carb setup,but it is pretty well 1st gen based and Maybe one of the 1st gen guys can chime in.
You can also gain some posts by reading the info in the Rules threads and then search info in other sections on this topic.
Now,13b Engines can be converted to Carb easily.You can get the aftermarket manifolds and block off the oil injection ports ( if the engine was EFI originally).
I'm EFI so I can tell you about the Carb setup,but it is pretty well 1st gen based and Maybe one of the 1st gen guys can chime in.
You can also gain some posts by reading the info in the Rules threads and then search info in other sections on this topic.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM