Haltech Sensor mounting..where to get taps?
07-20-03, 05:30 PM
#1
Senior Member
Thread Starter
Join Date: Feb 2001
Location: Moncks Corner, SC
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
Sensor mounting..where to get taps?
Where can i get the taps i need to install the air and coolent sensors? I've checked sears, autozone, advanced, lowes, and home depot. I need a 3/8"-18 and a M14x1.5 and I just can't find them anywere.
07-20-03, 05:54 PM
#2
Rotary Freak
Join Date: Feb 2001
Location: MN
Posts: 2,524
Likes: 0
Received 0 Likes
on
0 Posts
You should be able to get them at a local hardware store, thats where I got mine. The 3/8npt is easy, should be anywhere. The M14x1.5mm I coulden't find but a 1/4" npt works great, you just have to tap it down to the bottom of the threads.
07-22-03, 09:09 AM
#5
Senior Member
Thread Starter
Join Date: Feb 2001
Location: Moncks Corner, SC
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
I finaly found a 1/4NPT after going to every hardware store in town. But I was able to find a 1/4 to 3/8 NPT adaptor, so i used that to mount the water temp sensor 
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
7
09-19-15 07:13 PM
Farkel
3rd Generation Specific (1993-2002)
4
09-16-15 06:16 PM
