Haltech E8 Speed sensor hookup?
Trending Topics
#8
Originally Posted by classicauto
...........his 10TH annie? A 1988
edit: lol, sorry for the confusion dude, but I figured I'd tell you to save Ian a couple days of waiting for a reply then responding lol......I know him.
edit: lol, sorry for the confusion dude, but I figured I'd tell you to save Ian a couple days of waiting for a reply then responding lol......I know him.
Back of the cluster it would be the G/R wire or green with a red stripe. This wire goes to the A/T Control Unit, Cruise Control Unit, Power Steering Control Unit, A.A.S Control Unit and to the Passive Shoulder Belt Control Unit.
On the E-8 the digital input would be set to 'Road Speed' with a 'Falling Edge' and the 'Pulses/km' value at 2500.
#9
Thanks Guys.
I am being rather stupid. Since I have my AVCR hooked up for speed I can just use the same connection!!
Thanks for the information since I did not know the settings either.
(Right now I am in kincardine installing an E6X. The E6X harness and unit is alot nicer then the e8. Easier to place into the car then the E8!)
I also decided (on my unit) not to hook up the a/c through the haltech. Waste of an input and output. Just have to be careful that it is not on during boost runs
I am being rather stupid. Since I have my AVCR hooked up for speed I can just use the same connection!!
Thanks for the information since I did not know the settings either.
(Right now I am in kincardine installing an E6X. The E6X harness and unit is alot nicer then the e8. Easier to place into the car then the E8!)
I also decided (on my unit) not to hook up the a/c through the haltech. Waste of an input and output. Just have to be careful that it is not on during boost runs
#10
EFI Tech Wannabe
iTrader: (1)
Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,405
Likes: 0
Received 4 Likes
on
4 Posts
Originally Posted by crispeed
Ok then!
Back of the cluster it would be the G/R wire or green with a red stripe. This wire goes to the A/T Control Unit, Cruise Control Unit, Power Steering Control Unit, A.A.S Control Unit and to the Passive Shoulder Belt Control Unit.
On the E-8 the digital input would be set to 'Road Speed' with a 'Falling Edge' and the 'Pulses/km' value at 2500.
Back of the cluster it would be the G/R wire or green with a red stripe. This wire goes to the A/T Control Unit, Cruise Control Unit, Power Steering Control Unit, A.A.S Control Unit and to the Passive Shoulder Belt Control Unit.
On the E-8 the digital input would be set to 'Road Speed' with a 'Falling Edge' and the 'Pulses/km' value at 2500.
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-01-15 10:46 PM