E8 Speed sensor hookup?
 

Anybody know were a good place to hook this wire up?

Ian

Which year rx-7?

He's got a 10th annie ;)

I got one also. :)

sooooooo, wheel sensor? Back of the speedo?

And what year rx-7 is this for?

...........his 10TH annie? A 1988

edit: lol, sorry for the confusion dude, but I figured I'd tell you to save Ian a couple days of waiting for a reply then responding lol......I know him.

Ok then! :)
Back of the cluster it would be the G/R wire or green with a red stripe. This wire goes to the A/T Control Unit, Cruise Control Unit, Power Steering Control Unit, A.A.S Control Unit and to the Passive Shoulder Belt Control Unit.
On the E-8 the digital input would be set to 'Road Speed' with a 'Falling Edge' and the 'Pulses/km' value at 2500.

Thanks Guys.

I am being rather stupid. Since I have my AVCR hooked up for speed I can just use the same connection!!

Thanks for the information since I did not know the settings either.

(Right now I am in kincardine installing an E6X. The E6X harness and unit is alot nicer then the e8. Easier to place into the car then the E8!)

I also decided (on my unit) not to hook up the a/c through the haltech. Waste of an input and output. Just have to be careful that it is not on during boost runs

Great info man! :D