What does this hold?
03-14-04, 11:08 PM
#1
addicted to lounge
Thread Starter
What does this hold?
Its been a long time since my car has been together. Can someone help me out and tell me what this bracket here holds. Is it throttle stuff? Do I need this? Putting single turbo on. Thanks
03-14-04, 11:13 PM
#2
addicted to lounge
Thread Starter
ok, for some unknown reason I can't post my pic up here so I'll have to use this one. The bracket I am talking about is right in front of the coils. Right next to the oil filler neck. Thanks guys.
03-14-04, 11:18 PM
#3
Running Lean
iTrader: (1)
Join Date: Aug 2002
Location: Hometown of Deland FL
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
Dude,
- Next time use some program to circle what you are talking about. Like this
#1
Those little metal nipples just go THROUGH the intake, they don't go INTO it!!! HAHA! No need to block those off, I've seen guys just cut them off flush, or twist them with pliers and they usually pull right out.
#2 If this is what you speak of, it is the brace that holds the front UIM/TB. Really not necessary, ran mine without anything there for years, finally bolted it down a few months back.
Check out www.iluvmyrx7.com for their section with the factory manuals, much easier than posting a question every time you are lost.
- Next time use some program to circle what you are talking about. Like this
#1
Those little metal nipples just go THROUGH the intake, they don't go INTO it!!! HAHA! No need to block those off, I've seen guys just cut them off flush, or twist them with pliers and they usually pull right out.
#2 If this is what you speak of, it is the brace that holds the front UIM/TB. Really not necessary, ran mine without anything there for years, finally bolted it down a few months back.
Check out www.iluvmyrx7.com for their section with the factory manuals, much easier than posting a question every time you are lost.
Last edited by fitzrx7; 03-14-04 at 11:28 PM.
Trending Topics
03-14-04, 11:37 PM
#8
addicted to lounge
Thread Starter
I was talking about #2. Thanks. I have everything polsihed in my engine bay, including all visible brackets. Is this part visible when the uim and TB are installed. If it is I will be eliminating it since I didn't have that one done. Thanks guys
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
joel(PA)
Group Buy & Product Dev. FD RX-7
8
10-04-15 06:07 PM
FC3S Timmy
2nd Generation Specific (1986-1992)
8
10-02-15 08:08 AM