hks type 1 owner
#1
canadian monster
Thread Starter
iTrader: (2)
Join Date: Mar 2001
Location: Trois-Rivières, Qc, Can
Posts: 2,083
Likes: 0
Received 0 Likes
on
0 Posts
hks type 1 owner
Hey everyone, i would like to know how many of you guys have hks turbo timer type 1, i would have a question to ask you.
thanks a lot
puma
thanks a lot
puma
#2
accept no imitations™
Join Date: Mar 2001
Location: san francisco
Posts: 2,096
Likes: 0
Received 0 Likes
on
0 Posts
I have one, but never finished installing it. =)
I attached it to my existing GReddy harness, and pluged the Rev and Speed wires in, but only the rev one works, and since I ran out of splice connectors I never bothered to fix it.
I attached it to my existing GReddy harness, and pluged the Rev and Speed wires in, but only the rev one works, and since I ran out of splice connectors I never bothered to fix it.
#3
canadian monster
Thread Starter
iTrader: (2)
Join Date: Mar 2001
Location: Trois-Rivières, Qc, Can
Posts: 2,083
Likes: 0
Received 0 Likes
on
0 Posts
well, i though that more people had that turbo timer.
Anyway, if you have it installed even if it is at half, i would like you to give me the reading you have for the volt meter. When i start the car, i have around 14 V but it gradually goes down to 12.8, at that point, my A/F ratio don't work anymore. It really moves with the voltage of the system. Could you tell me what are the readings you have at different stage of running the car.
thanks a lot
puma
Anyway, if you have it installed even if it is at half, i would like you to give me the reading you have for the volt meter. When i start the car, i have around 14 V but it gradually goes down to 12.8, at that point, my A/F ratio don't work anymore. It really moves with the voltage of the system. Could you tell me what are the readings you have at different stage of running the car.
thanks a lot
puma
#5
Junior Member
Join Date: Mar 2001
Location: Memphis, TN
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
I've got mine hooked up. Except, I haven't bothered with rev and speed splices yet. Time is hard to come by with work and school, and a g/f! I'll be hooking up the wires tommorrow probably.
-Pete
-Pete
#7
Altitude SUCKS!!!
Join Date: Jul 2001
Location: Fort Collins, Colorado
Posts: 805
Likes: 0
Received 0 Likes
on
0 Posts
Hey Puma
I just got mine all hooked up I'm seeing a constant voltage of 13.65-13.80 while driving and at idle. The speed sensor seems to read ~3 Km/h in comparison to my Power FC though. hope this helps.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-01-15 10:46 PM