3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Hesitation for a split second at 6000RPM in 3rd gear??

Thread Tools
 
Search this Thread
 
Old 03-22-07, 09:22 PM
  #1  
Senior Member

Thread Starter
iTrader: (1)
 
NTIMD8's Avatar
 
Join Date: Nov 2006
Location: Ontario
Posts: 726
Likes: 0
Received 0 Likes on 0 Posts
Hesitation for a split second at 6000RPM in 3rd gear??

Hey guys,
Anyone ever have a hesitation only for a split second right at around 6000rpm. It only happens in 3rd gear and does not happen everytime. The car accelerates hard then falls on its face for a split second right at 6000rpm and then accelerates hard again to redline.

The only mod so far is a profec b Spec 2 boost controller (installed it in preperation for the DP and Cat back that I have waiting to be installed)

Peak boost never gets over 10.8psi.

Anyone ever experience this?

Thanks, Jason
Old 03-22-07, 10:03 PM
  #2  
Senior Member

Thread Starter
iTrader: (1)
 
NTIMD8's Avatar
 
Join Date: Nov 2006
Location: Ontario
Posts: 726
Likes: 0
Received 0 Likes on 0 Posts
Hmm I just found this...

Here's the fuel cut chart:
1000rpm-11.8
1500rpm-11.8
2000rpm-11.8
2500rpm-11.8
3000rpm-12.2
3500rpm-12.4
4000rpm-12.8
4500rpm-13.3
5000rpm-12.2
5500rpm-11.3
6000rpm-11.1
6500rpm-10.7
7000rpm 10.7
I wonder if I hit fuel cut. I will lower the boost to an even 10psi and see if that cures it.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
jjwalker
2nd Generation Specific (1986-1992)
7
09-23-15 09:25 AM
REX7&Z32TT
New Member RX-7 Technical
5
09-09-15 05:16 AM



Quick Reply: Hesitation for a split second at 6000RPM in 3rd gear??



All times are GMT -5. The time now is 10:26 AM.