Cigarette lighter fuse keeps blowing... advice?
#1
Rotary Enthusiast
Thread Starter
Cigarette lighter fuse keeps blowing... advice?
Just discovered that my cigarette lighter keeps blowing the fuse as soon as the ignition is turned on. I don't ever use the thing, but it'd be nice to have for a power source.
Any ideas for what to look for? I don't know how long its been since it worked...
Any ideas for what to look for? I don't know how long its been since it worked...
#3
Racecar - Formula 2000
Check in the bottom of the lighter receptacle to see if something metal fell off from something that you plugged in there and is shorting it out. That's pretty common.
Dave
Dave
#4
Rotary Enthusiast
Thread Starter
I pulled the lighter out, so there isn't anything loose causing a short...
Should I just run a new power/ground line for it? That's probably easier than finding the problem with the stock wiring...
Should I just run a new power/ground line for it? That's probably easier than finding the problem with the stock wiring...
#7
Racecar - Formula 2000
Originally Posted by TMadlem84
I pulled the lighter out, so there isn't anything loose causing a short...
Did you actually look into the bottom of the hole to see if there was anything in there that shouldn't be?
Dave
Trending Topics
#8
Rotary Enthusiast
Thread Starter
^The hole where the light would go? Yeah, I had it out & upside down... I was checking it out... maybe the lighter just went bad... planning on trying a replacement lighter tonight to see if that sold the problem.
#9
Rotary Enthusiast
Thread Starter
Someone mentioned checking the side mirrors... I have the mirror switches disconnected... I didn't realize they were on the cigarette lighter fuse... I assume this is what is causing the short?
#11
Rotary Enthusiast
Thread Starter
What all is run on the cigarette lighte fuse? Is it JUST the cigarette lighter? I can't find anything that isn't working aside from that...
Because if it's just the lighter, I could just run a new line for the lighter...
Because if it's just the lighter, I could just run a new line for the lighter...
#12
development
Thread
Thread Starter
Forum
Replies
Last Post
FC3S Timmy
2nd Generation Specific (1986-1992)
16
10-03-15 01:08 AM