ignition key lock cylinder removal
#1
Newbie
Thread Starter
Join Date: Jun 2007
Location: KS
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
ignition key lock cylinder removal
hello all, I have a 1988 RX7 and I need to remove the key lock cylinder. I took the screw out from the side and pull the part out with all the wires.
I can see the little part turning inside when the key turns. i also see a tiny hole close to the key cylinder and I put a paper clip in there but still can't pull the cylinder out.
am I doing something wrong. There is nothing wrong with the key cylinder, i need it for another car.
any help/instructions would be mostly appreciated
thanks
matrix733
I can see the little part turning inside when the key turns. i also see a tiny hole close to the key cylinder and I put a paper clip in there but still can't pull the cylinder out.
am I doing something wrong. There is nothing wrong with the key cylinder, i need it for another car.
any help/instructions would be mostly appreciated
thanks
matrix733
Thread
Thread Starter
Forum
Replies
Last Post
Boriquaguerrero
2nd Generation Specific (1986-1992)
20
04-22-19 01:15 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM