Wolf 3D Wolf V400 map for SR20DET
#1
Junior Member
Thread Starter
Join Date: Aug 2006
Location: ITALY
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Wolf V400 map for SR20DET
hi all guys,
hope i'm not unpolite by asking about another car than RX7
I also have an S13 for drifting, i purchased a Wolf V400 ECU and accidentally lost the plugin map included inside when purchased.
That map was very good, engine started at first try and revved very well.
I asked Wolf guys for that map but they sent me plugin_base_map_004 and this is not that good.
Does anyone know where to find a good base map for SR20DET engine?
Or does anyone have it?
Many thanks to all of You...
hope i'm not unpolite by asking about another car than RX7
I also have an S13 for drifting, i purchased a Wolf V400 ECU and accidentally lost the plugin map included inside when purchased.
That map was very good, engine started at first try and revved very well.
I asked Wolf guys for that map but they sent me plugin_base_map_004 and this is not that good.
Does anyone know where to find a good base map for SR20DET engine?
Or does anyone have it?
Many thanks to all of You...
#2
S13
Hey there neighbour
Well these are the only two maps for the s13 that I have....
Hope one of these is it.... wolf is wolf, but we can give you more help on a rotary
You wouldnt have a map for the Mitsubishi RVR turbo engine?
A presto!
Ciao
George
Well these are the only two maps for the s13 that I have....
Hope one of these is it.... wolf is wolf, but we can give you more help on a rotary
You wouldnt have a map for the Mitsubishi RVR turbo engine?
A presto!
Ciao
George
#3
ps, i would figure the ca18 det has the same firing order and boost set up.... i would still check it out and try it!
The other is an original shipping map, am not sure if its the base map..... i had that map for over a year.... may be its that one dunno....
Goodluck mate!!!
Where abouts in italy??
The other is an original shipping map, am not sure if its the base map..... i had that map for over a year.... may be its that one dunno....
Goodluck mate!!!
Where abouts in italy??
#4
Junior Member
Thread Starter
Join Date: Aug 2006
Location: ITALY
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
many thanks neighbour
i already have the shippinh map 004, it's the standard one they sent me. Car starts, but the matter is the one riginally insude the ECU was great and i was looking for that one...
i'll then work more on the base one.
About pther maps, sorry i do not have any other wolf for other cars...
seeYa next time!
i already have the shippinh map 004, it's the standard one they sent me. Car starts, but the matter is the one riginally insude the ECU was great and i was looking for that one...
i'll then work more on the base one.
About pther maps, sorry i do not have any other wolf for other cars...
seeYa next time!
#5
Rotary Enthusiast
Join Date: Feb 2004
Location: North Queensland Australia
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Hey I have one at http://www.angelfire.com/droid/wolf3dems/ the SR20DET map be careful it is a dyno tuned one for a stock engine use at you own risk.
Cheers
Michael Smith
Cheers
Michael Smith
Thread
Thread Starter
Forum
Replies
Last Post
killerrx710
Adaptronic Engine Mgmt - AUS
5
09-28-15 09:13 AM
killerrx710
2nd Generation Specific (1986-1992)
1
09-24-15 10:57 PM