Wolf 3D Wolf 3d V.4 Intalled Cars Won't Run
#1
Full Member
Thread Starter
Join Date: Jul 2002
Location: Wilmington NC
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Wolf 3d V.4 Intalled Cars Won't Run
Hey Guys i bought a wolf 3d v.4 intalled it and it don't want to fire, on the correct setting, i have 2 msd blaster coils for trailing and a 3rd gen coil for the leading, and a 3rd gen ignitor, and my cars a 2 gen and using a S4 crank angle sensor, and wired up as to wolfs diagram, i was wondering if and body had any maps, my car is a stock 91 turbo 2 motor with t04 turbo, and 550 injectors if anone has a map that could get me up and running, thanks shaun
#2
Full Member
Join Date: May 2001
Location: 4th Quadrant
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Hi Shaun, with most of my setups I use the MSD part#8509 Magnetic signal stabilizer (which I recommend for all pickups unless running Hall effect /Optical) using the stock CAS modified with to run in "dual pulse mode."
I'm not sure what blaster coils you have but stay away from cylindrical style Blaster coils and use an E-core type windings to reduce EMI. The preferred blaster coil would be the Blaster SS pictured here:
http://www.import-performance-parts....er-SS-Coil.htm
As always ask you Dealer for support as Tuning and Installing an ECU is a very challenging task for many. Your dealer will be able to provide maps as well as many troubleshooting tips should you run into issues.
You can also visit: http://www.wolfems.com.au/support
-Wayne
I'm not sure what blaster coils you have but stay away from cylindrical style Blaster coils and use an E-core type windings to reduce EMI. The preferred blaster coil would be the Blaster SS pictured here:
http://www.import-performance-parts....er-SS-Coil.htm
As always ask you Dealer for support as Tuning and Installing an ECU is a very challenging task for many. Your dealer will be able to provide maps as well as many troubleshooting tips should you run into issues.
You can also visit: http://www.wolfems.com.au/support
-Wayne
#3
Junior Member
Join Date: Jan 2004
Location: adelaide - South Australia
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
wayne,
you may need to close the airgap in the crank angle sensor try .1 mm - dont know how to convert
to inches
send me your email details & i will send you a map
regards
jason
www.mildrens.com.au:
you may need to close the airgap in the crank angle sensor try .1 mm - dont know how to convert
to inches
send me your email details & i will send you a map
regards
jason
www.mildrens.com.au:
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM