Wolf 3D Leaking fuel rail
Thread Starter
Rotary Enthusiast
Joined: Feb 2004
Posts: 778
Likes: 0
From: North Queensland Australia
Leaking fuel rail
OK guys I am having problems with my secondary injector leaking after the engine has been sitting for a while(3 weeks). Does anyone else have similar problems with Vitron O rings on your secondries? It may be a geometry issue or just crappy O rings. This is the second time I have had to service the Orings in a year. I run Modified Indy Blue 1000 cc injectors. I can supply pictures too!
Cheers
Michael Smith
Cheers
Michael Smith
Passenger
Posts: n/a
well my 2 cents are as follows: if you twist your fuel injector when installed does it have similar resistance to a cork screw in a cork? if not then id say you need to get your fuel rail to rest just a hair lower on the injectors or use thicker o rings or use shims/washers in between your fuel rail and manifold or combanation of those until they are tight.
