Wolf 3D how do i calibrate air temp sensor?
how do i calibrate air temp sensor?
You need to go to configuration, sensor setup, air temperature, calibration table. The range should have voltage vs temperatures. Check the voltage the sensor puts out at however many points you can while verifying the real temperature with a thermometer. Enter the voltage to the corresponding temp in the Wolf software. Once you get several points you should be able to linearize the calibration from there.
An alternative is to download a Wolf plug-in map for your car and use its calibration. You can't be sure it is correct, but it should be reasonably close.
Josh
An alternative is to download a Wolf plug-in map for your car and use its calibration. You can't be sure it is correct, but it should be reasonably close.
Josh
Thread
Thread Starter
Forum
Replies
Last Post
troym55
3rd Generation Specific (1993-2002)
23
May 25, 2016 12:42 PM
Adaptronic Cranking fuel table messed up?
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
