Ventura County Rotary Owners? Show of Hands?
#104
Rotary Enthusiast
iTrader: (4)
Well I threw a pretty decent street tune on the car today. Pulls real hard, good afr's and no knock at 17psi. Pretty much just hit WOT, tip in and cruise stuff, still need to get back to the low boost cells and partial throttle stuff but its good enough to take it down to SS for sure. Now I just need to be off work so I can attend! How is everyone's projects coming along?
#106
Rotary Enthusiast
iTrader: (4)
Fuel: re-wired Supra pump, KG Parts rails, ID725 primaries and Bosch 1680 secondaries, Aeromotive FPR
Ignition: HKS twin power, stock coils, stock ngk wires, all oem #9 plugs
Exhaust: 3" DP, 3" resonated mid pipe, RB dual tip, Tial 44mm wastegate dumped to atmosphere
PFC, Datalogit and Innovate LC-1 wideband for tuning. Using the PFC for boost control with a Greddy solenoid. Also running 315cc's of water with AEM water/meth kit.
#108
no rx7 here but just finished fabbing the new intake tray im going to attempt to polish...this weekend ill be fabbing a different coolant bottle...samco couplers are on the way..and lots of cleanup in the engine bay haha (still needs some tuning with the new injectors)
Last edited by gregs22; 09-20-11 at 12:23 AM.
#110
Full Member
I'm out in Simi Valley, had my FD for about 1.5yrs
unfortunately, it's not currently in running condition...LOL! Don't think I'm gonna make SevenStock this year...
unfortunately, it's not currently in running condition...LOL! Don't think I'm gonna make SevenStock this year...
#114
Full Member
Join Date: Jan 2010
Location: West Coast!
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Hi all. I have an 89 N/A Auto that I'm trying to get running. It's been out of commission for a long time. I just finished putting the small block together. That intermediate plate and those
f***en apex seals were a b*t*ch! You know, if I didn't read about super-glueing the two piece apex seals together, I don't know how long I would have been stuck. I think it should be mentioned that when you do glue them together, it mush be on a VERY STRAIGHT slab and the excess glue can not build-up on the sides, or they won't go in without breaking. (Learned all that on my own!) Anyhow, I really felt like celebrating when I got that small block together! LOL! You know, I asked Mariah Motorsports for help or a quote, $400.00 +, to put the small block together with all my new parts. SHEZZZZZzzzzz!!!! that motivated me to try, try, again. Anyhow I did it without damaging anything and all by myself I did, I did! Anyhow, If you guys still have any tips for me, or any "watch for this and becareful" situations,,, just let me know... Hopefully I'll be up and running this year!!!!
f***en apex seals were a b*t*ch! You know, if I didn't read about super-glueing the two piece apex seals together, I don't know how long I would have been stuck. I think it should be mentioned that when you do glue them together, it mush be on a VERY STRAIGHT slab and the excess glue can not build-up on the sides, or they won't go in without breaking. (Learned all that on my own!) Anyhow, I really felt like celebrating when I got that small block together! LOL! You know, I asked Mariah Motorsports for help or a quote, $400.00 +, to put the small block together with all my new parts. SHEZZZZZzzzzz!!!! that motivated me to try, try, again. Anyhow I did it without damaging anything and all by myself I did, I did! Anyhow, If you guys still have any tips for me, or any "watch for this and becareful" situations,,, just let me know... Hopefully I'll be up and running this year!!!!
#120
KM48 Burnout
iTrader: (4)
Join Date: Nov 2001
Location: Ventura County, CA
Posts: 1,692
Likes: 0
Received 0 Likes
on
0 Posts
Yep. It has a set of stage 3 BNRs with meth now.
Here's the FFE Trigger kits. I upgraded to the P2000 so it can run it. They also might have a PFC kit coming out, so follow that thread.
https://www.rx7club.com/vendor-classifieds-276/gb-full-function-engineering-crank-trigger-kits-s4-s5-re-13bs-945965/
Here's the FFE Trigger kits. I upgraded to the P2000 so it can run it. They also might have a PFC kit coming out, so follow that thread.
https://www.rx7club.com/vendor-classifieds-276/gb-full-function-engineering-crank-trigger-kits-s4-s5-re-13bs-945965/
#124
Rotary Enthusiast
iTrader: (4)
Pretty sure Higgins muffler can do it but I know a better place that's done some welding for my vmic but forgot the name, ill ask my buddy about it, Its like a block away from that stupid car with 2 front ends at a body shop down fairview.
edit:
Its Absolute Engineering, Dave Tory there has done good work for me and some friends in the past.
edit:
Its Absolute Engineering, Dave Tory there has done good work for me and some friends in the past.
#125
Pretty sure Higgins muffler can do it but I know a better place that's done some welding for my vmic but forgot the name, ill ask my buddy about it, Its like a block away from that stupid car with 2 front ends at a body shop down fairview.
edit:
Its Absolute Engineering, Dave Tory there has done good work for me and some friends in the past.
edit:
Its Absolute Engineering, Dave Tory there has done good work for me and some friends in the past.