Steve Kan Dyno Tune So Cal
11-19-07, 08:44 PM
#26
Must have brap ...
iTrader: (3)
Join Date: Dec 2006
Location: Tucson, AZ
Posts: 1,882
Likes: 0
Received 0 Likes
on
0 Posts
i'd definitely be in but can't afford the deposit until after christmas. <----I'll try to figure something out & continue to monitor this thread though.... (i'll be away from the comp till this weekend but you can email me @ retaliate1st@yahoo.com)
11-19-07, 10:19 PM
#27
Cancel it dude. You got the best tuner in the country coming. Don't miss out.
I don't know you will have to ask him.
I will begin accepting deposits in a couple of weeks. This will lock up a time and spot for you. Hopefully, you will be able to make it.
1) Jesuscookies
2) anderdick88
3) slpin
4) Matt g
5) RX7LINK
6) ArmenMAxx
7) PandazRX-7
8) turBRO240
Originally Posted by RE-Mamamia
If i have the Peter Ferrel purple box, can he tune? I have a laptop with datalogit software...
Originally Posted by retaliate1st
i'd definitely be in but can't afford the deposit until after christmas. <----I'll try to figure something out & continue to monitor this thread though.... (i'll be away from the comp till this weekend but you can email me @ retaliate1st@yahoo.com)
1) Jesuscookies
2) anderdick88
3) slpin
4) Matt g
5) RX7LINK
6) ArmenMAxx
7) PandazRX-7
8) turBRO240
11-20-07, 12:00 AM
#29
so this time around, i gotta get bigger injectors. that's all i really need left for supporting mods to run 15psi.
XS have been known to be a bit inconsistant on the tunes. There are a lot of mix reviews. I've always love XS engineering since they started in Fullerton back in the days, they do great work. but i would only go tune there for tuning if Steve isn't coming for 6 months and i need a emergency tune. Not to mention, their tuning fee is almost double.
11-20-07, 01:15 AM
#30
[QUOTE=RX7LINK;7531728]yes, roughly about $150 for dyno depending on where it is at. RR&R charges $75/hr. Steve won't go over 12psi unless you have upgraded injectors and fuel pump. My stock injector duty cycle were at 90~95% @ 12psi. 285 whp.
I have 1300cc injectors and Walbro pump..350 will cover 14psi then im guessing?
So total is going to be roughly ~$500 for my tune depending where its going to be tuned!!?!!?!(350+150dyno time)
I have 1300cc injectors and Walbro pump..350 will cover 14psi then im guessing?
So total is going to be roughly ~$500 for my tune depending where its going to be tuned!!?!!?!(350+150dyno time)
11-20-07, 01:22 AM
#31
[QUOTE=ArmenMAxx;7531934]
Steve recomends 1500cc, but yes, 1300cc 2ndaries + walbro should work fine for 14psi. I would get a hks Twin power too if u don't already have it.
yeah, roughly $500.
yes, roughly about $150 for dyno depending on where it is at. RR&R charges $75/hr. Steve won't go over 12psi unless you have upgraded injectors and fuel pump. My stock injector duty cycle were at 90~95% @ 12psi. 285 whp.
I have 1300cc injectors and Walbro pump..350 will cover 14psi then im guessing?
So total is going to be roughly ~$500 for my tune depending where its going to be tuned!!?!!?!(350+150dyno time)
I have 1300cc injectors and Walbro pump..350 will cover 14psi then im guessing?
So total is going to be roughly ~$500 for my tune depending where its going to be tuned!!?!!?!(350+150dyno time)
Steve recomends 1500cc, but yes, 1300cc 2ndaries + walbro should work fine for 14psi. I would get a hks Twin power too if u don't already have it.
yeah, roughly $500.
11-20-07, 05:44 PM
#35
That's good news. Yes this is a for sure thing, and yes I have spoken with him several times by both phone and PM to lock up the date. Maybe he thinks I have not announced a date yet? because that was still up in the air. In any event, it is a go for January 26th and 27th.
11-21-07, 11:37 AM
#37
Rotary Freak
Join Date: Feb 2001
Location: fort worth, tx, usa
Posts: 1,926
Likes: 0
Received 0 Likes
on
0 Posts
He was asking abou the Dec tuning trip which I was not commited... 
That's good news. Yes this is a for sure thing, and yes I have spoken with him several times by both phone and PM to lock up the date. Maybe he thinks I have not announced a date yet? because that was still up in the air. In any event, it is a go for January 26th and 27th.
