nelam

Everyone have any experience with Rick's Performance Rotary here in the Bay Area, CA? Good experience and bad?

http://www.ricksrotaryperformance.com/

How about the other shop down in Sunnyvale? Which one do you guys prefer to deal with?

Thanks

reza

ricks are okay, kinda expensive.
i learnt to do stuff myself lately
that is the way to do it.

reza

ttb

are you talking about Ivan in Sunnyvale? If you're anywhere in that area definitely take it to him. He knows the RX-7 very well. Has done about 90% of the work on my car, very happy with the results. Even if you're not in the area might be worth it to drive down (I do....)

Been to Rick's once, just for some routine stuff. Was okay, nothing really special.

What do you need done?

ManicMike

The previous owner of my FD swears by Rick's and had all of his work done there. I've never been there personally, but my car is still in great shape. I'm in the peninsula and plan to check out Ivan next time I need something done. He seems to have a lot of respect here on the forum.

suprfast

all i have to say is that RICK is the man. i have spent lots of money with him(damn oil leak) and so has my buddy. i only take it to him as his customer service is truley amazing. granted he hates to stop and talk cause time is money, but he truely knows his ****. if donovan would chime in then you can get his opinion. i second that he is expensive, but he covers all work with a one year warranty. when he found my oil leak, he decided to go digging around to see if anything else was wrong. sure enough, he found about 4 other MAJOR items that may have been over looked by someone else. i say may, but i vouch for him. great guy.
kris

Psychoblue23

Where is Ivan and what is the name of his shop?

- james

Sammymatik

My friend had his clutch and breaks done at Ricks. He was satisfied with the service but, I think it's a bit expensive. Then again, I'm a DIY type of guy.

Rotary Racer

Rick is a good guy. Knows his stuff, clean organized shop, good location.

nelam

I do most of the stuff myself too. But just wanna bring it to a rotary specialist to check and see the condition of the engine in greater detail. I need someone to convince me that my engine is still fine.

rynberg

I have been taking my FD to Rick's for over a year now and have had very good customer service. He knows his stuff and seems very honest. He is also usually pretty quick, when he's not backlogged. I highly recommend his shop.

BATMAN

there is mr mazda

and rotorsports in campbell

mightyslash

Depends on where you are

Indra

Nelson
I think you should take the car Rick. I have searched around before. That is the only shop that I would take my car to other than JRE but JRE has closed down a few years ago
Batman is rotorsport still open ?
I heard He closed his shop.
I wouldnt take my car to Rotorsport.

Rotary Racer

What I meant was good area. Not worried about your car getting stolen or broken into. Safe neighbor hood I should have said :P

jramosrx7

Rick has worked on both my '84 GSL-SE and my current FD. Rebuilt the FD engine with 3 mm seals a few years back. Nothing but top-notch work!! If you're looking for someone to BS with you, Rick's not the guy. But if you're looking for one of the best rotary guys around, take it there.

suprfast

well when i take my car to ricks its about an hour and a half drive. not really the best location for me as im in merced. its worth it though when i get the car back in working perfect order. he is a great guy and aside from what he charges i give him an A+ great neighborhood too.
kris

Dougie_fresh_007

hey all i gotta say is dont discount SR motosports in brentwood, but i dont know where u are, i have had good experiance wit sr, but i have never taken my car in, but hey who else has a 8 sec 13b rx7 thats non tube framed, so they knowthier **** nuff said+

1FooknTiteFD

It's Ivan's autopalace! 408-730-0567. I had my motor rebuilt there and a lot of other stuff done as well. Plus they have the quickest turn around time and also work on cars during the weekend as well. Once all the parts arrived, it took less than a week to build my motor, and have it in my car running after it was installed.

I wouldn't take it to rotorsports in campbell. I've seen their work, they did a T04E in my friend's Turbo 2 and rigged the **** out of it. And what's with all the blue hoses and such?

BATMAN

When I was visiting Yellow R1 and his wife, he told me that they are still open and he was pleased with his work.

I believe the guy's name is Paul.

When I first got my FD years ago, Paul did my Silicon vacumm hoses (that Ivan was skeptical at first) and it has never caused any problems.

Vinay's FD was worked by Paul and he was pleased. Itoen has Vinay's FD.

And there were a few other people that aren't forum members that are pleased with Paul's work.

As far as Mr. mazda is concern, my buddy Maz had him do work on his FD and the workmanship is awesome too.

BTW, why wouldn't u take it to Rotorsports?

There is one mechanic that I would stay away from that has been caught stealing ****, swapping out good parts from ur car and intentionally disconnecting and cutting **** like wires in ur car so u will be a repeat customer.

There are at least 4 forum members and 2 non-forum members that have had the same experience from this mechanic as well. 2 of them decided to sell his FD since he was tired of the scam being pulled on his FD. The rest have taken their cars elsewhere. I have advised a few friends that own RX7 about this individual's behavior and they have complied and taken their car elsewhere, even if it means driving across the bay to get a honorable mechanic.

There is continuing investigation on this mechanic. I am not going to reveal his name at this point.

All I have to say is that when a customer trusts a mechanic to work on his/her car and they have been caught or is suspect of doing stuff to their cars word will get out, and it gets out fast. That's all I have to say.

jramosrx7

Rotorsports in Campbell closed a couple of years ago. Paul had significant personal and business problems that caused his customer's great pain. There are many who had to take their half-finished cars elsewhere.

I understand he has returned and opened a new shop in the area, don't know where. As noted many folks were pleased with his work, but many not.

ttb

i don't thin SR is a regular shop that would fix any old car...

ttb

i love it when batman teases us like this....come on, i'm bored, what's the gossip....

BATMAN

Hey Joe, long time no see.

Anyways, I heard that Paul opened up shop in Santa Clara.

-Alain

Indra

I took my car to Paul in 1998
It took him 9 months to do my car and it was still not finished. He connected a hose to a wrong vaccum solenoid.
During this 9 months he scratched and make dings on my cars The old shop was a bit small that he has to push in and out my car everyday just to get work done on other 7s. Looks like it hit the garbage that was close to his shop.

BATMAN

I and a few others must have been the lucky ones

He did a few things for free.