soo ima about done with my t2 swap.

but im having trouble getting it to idle on its own. i can make it idle but only if i keep givning it gas.

soo ive done as much as i possibly can. with out getting any actual help.

but im just stuck now, and need some one who has more experiances with t2's..

any help would be greatful...


and for those who wanna call me a nuub, go ahead, its true, ive only been into the rotary scene less than 2 years, i dont know everything, soo what, im learing,.. thats all that matters.

http://www.youtube.com/watch?v=BcFRBNu37Ok

http://www.youtube.com/watch?v=pMzY_Jya_oI

 

im located in the Gardena Area 90249,

im right off the 91, 105,110,and 405

also i have good compression, i checked for vaccum leaks and foudn none, im getting fuel, and everything else checks out.. but still need help to make it idle on its own..

and i try to adjust the tps but it doesnt seem to have an affect, i replaced it with a working one..

could that fact that im running a Jspec harness with us ecu and us motor be affecting it in any way?

 

J-U-N-K I-T

 

thanks Mel. but i dont plan to do that any time soon,,

 

Its a rotary...**** happens

 

What AFM are you using? Could be a bad one...

 

dang beat me to it..

:AA:

 

s5 t2 afm, its working fine.

 

how did you check for a vac leak? what did you do i mean.

:AA:

 

i removed mani, looked at all the things i capped off, and checked that all hoses were all hooked up all the way, (i have zero emissions) so it wasnt too much to look at , and block off plates checked out good too.

 

hmm...timing? prolly not on tdc. some kind of tubing leak, somethings not hooked up right? there's to many things i can think of that might be wrong with it.

:AA:

 

i'd have to look at it..needless to say.

:AA:

 

jaime, check your coolant actuator thinging, god damn it, ask Kent, we went and asked yoshiya today

 

well if any one can come and help me check out the car, that would be really great...

 

wish the best

 

I GOT HER IDLING!!!!!! i think i did it!!

still need help with her though.

 

whats it doing? and what did you do to get her to run

 

i got it to idle on its own.. not the best. i still gotta adjust the timing and tps.. and tinker with it a bit more... then im good..

 

good greif..

:AA:

 

im still gonna need to have some one help me look over the car.. i can only do(and know) soo much.,.

 

well, dont look at me!!

:AA:

 

damn he doesnt even give credit even when we did give him some help...***...

either way...AA his timing is off, we messed with it yesterday, but the tps needs adjustment if he hasnt done it yet...

 

LMAO!!

 

nikka you standing around half the time and moving maybe the tps and some little things isnt considered ALOT of help, yes you did help me out with that. but overall, i did everything my self. nuub!!

go work on your RE!! did you get your haltech?

 

ding ding ding........round 1. Jaime and Alex.