3Castles

Well I just bought a 88 RX7 Turbo II and found out out from the shipping company that was shipping the car to me said the key the seller had left me was no where to be found.

And it will take me a while to register since I only received a bill of sale.

Anyone work at Mazda dealership where I can provide a Vin# so I can get a key for the car?

Any help would be great.

William

3Castles

FC_EDDIE

iTrader: (30)

You can try other rx7 keys...most open and start other rx7s hit the junkyard and find a few.

3Castles

Thanks i will

sinone

iTrader: (1)

Hit up the locksmith they can make you a key.. Take the cylinder off the passenger door because it has number on it that he can use to make the key.. My and friend I did it on his 240sx..

3Castles

Thanks for the help I'll try that.

iLikeEatPoo

iTrader: (6)

Get that lock smith to cut you some new rims too.

stormshadow531

iTrader: (5)

well i had a key made at the closest dealership and he just asked for my registration and my license to verify it was me. if you happen to register it before you get a key, this is prob the easiest way.

HOZZMANRX7

iTrader: (43)

+1

Any dealership can get a key made with only your VIN # as reference. Some will do it for free if you say pretty please.

DivinDriver

iTrader: (15)

I recently bought a used SA lockset for future replacement - - both doors, ignition, hatch; my existing key turns 3 of the four locks.

Security... ur doin it rong!

AcidAngel7477

iTrader: (16)

or you can just replace the lock's with all new/used one's and only have one key. with a spare key of course.

blackdragonauto.com is a nice place to start looking for the stuff you need to replace.

:AA:

3Castles

Yeah the wheels blow...I have a set of rikens with a 3inch lip for them.