Does anyone know were there a lapping shop in ca?
Thread Starter
Joined: Jul 2006
Posts: 432
Likes: 2
From: Central Coast of California
Does anyone know were there a lapping shop in ca?
I got my engine in pieces and i wanted to to get my intake irons lapped but i cant find any machine shops in the santa barbara county that do this kind of work... can any of you guys help me out, Or know a place were i can get this done so i can get my s5 on the streets again and not puffing smoke!
Thread Starter
Joined: Jul 2006
Posts: 432
Likes: 2
From: Central Coast of California
is this it???
Jack C Drees Grinding Company Inc.
Private Company, Headquarters Location
11815 Vose St. B, North Hollywood, CA 91605, United States
(818)764-8301,
Primary SIC: Industrial Machinery, Not Elsewhere Classified, Primary NAICS: Other Commercial and Service Industry Machinery Manufacturing
Description: Manufacturing: Grinds castings for the trade; commercial or industrial precision grinding service
Jack C Drees Grinding Company Inc.
Private Company, Headquarters Location
11815 Vose St. B, North Hollywood, CA 91605, United States
(818)764-8301,
Primary SIC: Industrial Machinery, Not Elsewhere Classified, Primary NAICS: Other Commercial and Service Industry Machinery Manufacturing
Description: Manufacturing: Grinds castings for the trade; commercial or industrial precision grinding service
Trending Topics
Joined: Jun 2008
Posts: 8,376
Likes: 28
From: Chino Hills, CA
Hot tip if you've never had housings lapped before: get 'em hot-tanked after. Then clean the living hell out of them by hand until they pass "white-glove."
If you don't get all (as in ALL) the abrasives out of all the channels and passages, it ends up in your oil the first time you fire it up, and your new seals will last about an oil change.
You can't get those suckers too clean. Stuff ends up in the pores of the casting; scrub and rinse 6 times and you'll still be wiping it off what looks like clean iron.
Don't ask how I know.
If you don't get all (as in ALL) the abrasives out of all the channels and passages, it ends up in your oil the first time you fire it up, and your new seals will last about an oil change.
You can't get those suckers too clean. Stuff ends up in the pores of the casting; scrub and rinse 6 times and you'll still be wiping it off what looks like clean iron.
Don't ask how I know.
Thread Starter
Joined: Jul 2006
Posts: 432
Likes: 2
From: Central Coast of California
Hot tip if you've never had housings lapped before: get 'em hot-tanked after. Then clean the living hell out of them by hand until they pass "white-glove."
If you don't get all (as in ALL) the abrasives out of all the channels and passages, it ends up in your oil the first time you fire it up, and your new seals will last about an oil change.
You can't get those suckers too clean. Stuff ends up in the pores of the casting; scrub and rinse 6 times and you'll still be wiping it off what looks like clean iron.
Don't ask how I know.
If you don't get all (as in ALL) the abrasives out of all the channels and passages, it ends up in your oil the first time you fire it up, and your new seals will last about an oil change.
You can't get those suckers too clean. Stuff ends up in the pores of the casting; scrub and rinse 6 times and you'll still be wiping it off what looks like clean iron.
Don't ask how I know.
is this it???
Jack C Drees Grinding Company Inc.
Private Company, Headquarters Location
11815 Vose St. B, North Hollywood, CA 91605, United States
(818)764-8301,
Primary SIC: Industrial Machinery, Not Elsewhere Classified, Primary NAICS: Other Commercial and Service Industry Machinery Manufacturing
Description: Manufacturing: Grinds castings for the trade; commercial or industrial precision grinding service
Jack C Drees Grinding Company Inc.
Private Company, Headquarters Location
11815 Vose St. B, North Hollywood, CA 91605, United States
(818)764-8301,
Primary SIC: Industrial Machinery, Not Elsewhere Classified, Primary NAICS: Other Commercial and Service Industry Machinery Manufacturing
Description: Manufacturing: Grinds castings for the trade; commercial or industrial precision grinding service
a doctor, lawyer and a banker went to a strip joint. after this blond chick did her thing, the
doctor pulled out his wallet and placed a $100 on her g-string. there goes the lawyer with his $20. banker dude pulled out his ATM card, swiped it in her crack and took the $100 and the $20.
doctor pulled out his wallet and placed a $100 on her g-string. there goes the lawyer with his $20. banker dude pulled out his ATM card, swiped it in her crack and took the $100 and the $20.
a doctor, lawyer and a banker went to a strip joint. after this blond chick did her thing, the
doctor pulled out his wallet and placed a $100 on her g-string. there goes the lawyer with his $20. banker dude pulled out his ATM card, swiped it in her crack and took the $100 and the $20.
doctor pulled out his wallet and placed a $100 on her g-string. there goes the lawyer with his $20. banker dude pulled out his ATM card, swiped it in her crack and took the $100 and the $20.
:s leep:
Thread Starter
Joined: Jul 2006
Posts: 432
Likes: 2
From: Central Coast of California
a doctor, lawyer and a banker went to a strip joint. after this blond chick did her thing, the
doctor pulled out his wallet and placed a $100 on her g-string. there goes the lawyer with his $20. banker dude pulled out his ATM card, swiped it in her crack and took the $100 and the $20.
doctor pulled out his wallet and placed a $100 on her g-string. there goes the lawyer with his $20. banker dude pulled out his ATM card, swiped it in her crack and took the $100 and the $20.
Thread
Thread Starter
Forum
Replies
Last Post
joel(PA)
Race Car Tech
0
Oct 1, 2015 10:25 AM
