Automotive Detail Work
Thread Starter
Wangan Nasty
Joined: Apr 2006
Posts: 1,779
Likes: 3
From: Irvine, Southern California
Automotive Detail Work
Hey guys,
I did something similar for sevenstock 2006.
Thought i would throw up the offer again. I detailed Jon's SA22/FB/1st Gen, and thought i would throw up some pictures of some work i have done within the last couple of years.
When i got the car, it had overspray all on the right (passenger side) of the car, including the window. Certain parts of the car had uneven areas of clearcoat, and a lot of fallout.
What I did: Full Exterior Detail
-Wash the car
-Use a more abrasive clay to get rid of all the fallout spots, and overspray on the car.
-Polish with a Dewalt Polisher at 1800 RPMs with Autoglym Fine Abrasive, and an Orange Foam Polishing Pad
-Finish down with a Softer Foam pad and a combination of Menzerna Intensive Polish/Final polish
Final Wax: Autoglym Radiant Wax Polish
Some Before Pictures:
Some End Results:
I did something similar for sevenstock 2006.
Thought i would throw up the offer again. I detailed Jon's SA22/FB/1st Gen, and thought i would throw up some pictures of some work i have done within the last couple of years.
When i got the car, it had overspray all on the right (passenger side) of the car, including the window. Certain parts of the car had uneven areas of clearcoat, and a lot of fallout.
What I did: Full Exterior Detail
-Wash the car
-Use a more abrasive clay to get rid of all the fallout spots, and overspray on the car.
-Polish with a Dewalt Polisher at 1800 RPMs with Autoglym Fine Abrasive, and an Orange Foam Polishing Pad
-Finish down with a Softer Foam pad and a combination of Menzerna Intensive Polish/Final polish
Final Wax: Autoglym Radiant Wax Polish
Some Before Pictures:
Some End Results:
Last edited by Miata_mx5; Sep 3, 2008 at 03:31 PM.
Thread Starter
Wangan Nasty
Joined: Apr 2006
Posts: 1,779
Likes: 3
From: Irvine, Southern California
Some Pictures of my "Demo Car" with a Customers 360 CS.
If people wish to see, i can post more pictures of other cars have done, just for ***** and giggles.
I will offer my services for all cars before sevenstock. PM me if you are curious as to what i can do (Prices Avg from 150 ~ 400 depending on what is needed) Materials Cost have risen too.
If people wish to see, i can post more pictures of other cars have done, just for ***** and giggles.
I will offer my services for all cars before sevenstock. PM me if you are curious as to what i can do (Prices Avg from 150 ~ 400 depending on what is needed) Materials Cost have risen too.
Last edited by Miata_mx5; Sep 3, 2008 at 03:30 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
Aug 18, 2015 05:30 PM