10th AE @ junk Yard!!
#54
Full Member
Thread Starter
Join Date: Dec 2003
Location: L.A.
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
I took the mirrors.. HAHA
They are black now. Was the glass still there?? Also I couldnt tell if it was dirty or bronze but the hatch didnt look rusted. I might go back for that
They are black now. Was the glass still there?? Also I couldnt tell if it was dirty or bronze but the hatch didnt look rusted. I might go back for that
#61
#turbodavebuilt
iTrader: (50)
i went with CHINX74RX2 and we took the motor out and took it apart all the irons were good and rotor housings were almost like new condition.i myself kept the ROTORS and counter weights everything else CHINX74RX2 kept and sold to RENE im guessing.im surprised out of all the people that went to see the car no one took the motor.anyways atleast the transmission is still in the car.
#66
the implications matter
iTrader: (1)
Join Date: Dec 2005
Location: Tustin, CA
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Brismo7 and I grabbed the rear end, axles, brake stuff (all of it), oil cooler plus a few interior panels. The phrase dropping a rear end takes on a whole new meaning when you're not allowed to bring in a floor jack. We grabbed a spare bench seat for padding and made short work of that.
Still there: Trans, coil packs (leading & trailing), clutch stuff, pedal assembly, AC condensor, front and rear subframe, swaybars, rear tails (as mentioned one has hairline cracks), steering wheel (but not center emblem), heater logicon, front carpet, front fenders, front and rear bumper covers. Misc engine bits includine the eccentric shaft and turbo assembly, 10AE wheels.
If you're going the car is about 10 rows from the back wall on the left. The A-frame was still by the front of the car when we left it.
Still there: Trans, coil packs (leading & trailing), clutch stuff, pedal assembly, AC condensor, front and rear subframe, swaybars, rear tails (as mentioned one has hairline cracks), steering wheel (but not center emblem), heater logicon, front carpet, front fenders, front and rear bumper covers. Misc engine bits includine the eccentric shaft and turbo assembly, 10AE wheels.
If you're going the car is about 10 rows from the back wall on the left. The A-frame was still by the front of the car when we left it.
#68
6 Speed FC
iTrader: (2)
LMAO at finish line!!!
**** YOU WACKYRACER!!
Joel/frijolee:
Brismo7 Lookin like a special Ed Student:
Yep, no floor jacks allowed. had to let the diff fall about 1.5 feet or so. Give or take a couple inches
This is my friend Albert the black widow, he helped me with a couple 12mm Nuts.
What you'll find if you go there:
^---BAHAHAHA
All in all, GREAT DAY. Thanks Frijolee!!!!!!!!!!!!!!
**** YOU WACKYRACER!!
Joel/frijolee:
Brismo7 Lookin like a special Ed Student:
Yep, no floor jacks allowed. had to let the diff fall about 1.5 feet or so. Give or take a couple inches
This is my friend Albert the black widow, he helped me with a couple 12mm Nuts.
What you'll find if you go there:
^---BAHAHAHA
All in all, GREAT DAY. Thanks Frijolee!!!!!!!!!!!!!!
#73
6 Speed FC
iTrader: (2)
Hahaha, funny.
Thank you. I was so dirty from laying on the ground. oy, it was bad. I'm sooo ******* glad i didnt see those two black widows until after the diff was pulled. i dont know if i could of gone back under there...
I didnt even notice them...