Pics of my with 99spec lip
10-11-01, 01:37 PM
#1
Full Member
Thread Starter
Join Date: Apr 2001
Location: San Jose, CA USA
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Pics of my with 99spec lip
Hey all, just installed my 99 spec lip the other day... and wanted to post some pics. It was kinda cloudy that day so the pictures are a little dark.. tell me what you think!!!
thanks
dave
thanks
dave
Last edited by FatDave747; 10-11-01 at 01:39 PM.
10-11-01, 02:22 PM
#4
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Mine looks exactly like yours.
Except for the fact that my car is Red and I still have the stock wheels.
How much do those wheels weigh?! They look like they weigh 50 pounds! (that's without the rubber...
)
Later,
Except for the fact that my car is Red and I still have the stock wheels.
How much do those wheels weigh?! They look like they weigh 50 pounds! (that's without the rubber...
)Later,
Trending Topics
10-11-01, 05:39 PM
#8
Hi sir
Join Date: Feb 2001
Location: Modesto/Rancho Cordova CA
Posts: 443
Likes: 0
Received 2 Likes
on
2 Posts
Looks good. I have one on mine too. It replaced the stock R2 that was pretty smashed. Get ready to scrape on everything I think it adds a lot to the look of the car for a little money. I seemed to notice some downforce when I put mine on.
I think it adds a lot to the look of the car for a little money. I seemed to notice some downforce when I put mine on.
10-11-01, 07:23 PM
#9
Full Member
Thread Starter
Join Date: Apr 2001
Location: San Jose, CA USA
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
i hear that it actually does produce downforce, I don't know if it's mental or not, but it does feel a little better on the highway above 80 though.
10-12-01, 07:50 AM
#11
Original Gangster/Rotary!
iTrader: (213)
Re: installation
Originally posted by Mr. Mahtab
What exactly did you have to do to modify the lip to fit your car?
What exactly did you have to do to modify the lip to fit your car?
I'm pretty sure you don't have to modify anything. RP just bolted mine on.
Fat Dave, that's a nice white FD. Now you just need Efini emblems and you're set :p
10-12-01, 01:48 PM
#13
no
Join Date: Apr 2001
Location: Dallas, TX / Tokyo, Japan currently
Posts: 2,295
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: installation
Originally posted by GoodfellaFD3S
Hello, Mr. Kitty Cat
I'm pretty sure you don't have to modify anything. RP just bolted mine on.
Fat Dave, that's a nice white FD. Now you just need Efini emblems and you're set :p
Hello, Mr. Kitty Cat
I'm pretty sure you don't have to modify anything. RP just bolted mine on.
Fat Dave, that's a nice white FD. Now you just need Efini emblems and you're set :p
rich,
i think there's one hole you have a to drill that i know of. other than that, its pretty straight forward i hear, but it does stick out a little on the side.....it isnt a PERFECT match for the US spec front end.
10-12-01, 01:54 PM
#14
Full Member
Thread Starter
Join Date: Apr 2001
Location: San Jose, CA USA
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Mr. Mahtab
you do have to drill 1 extra hole on each side to line it up with the fasteners. Doesn't take too long to do. It took me about 20 minutes to take the old lip off and put the new one on. On mine, it slightly bulges out on the side, but doesn't extend into the wheel well. I'll try to get some close ups of it so that you guys can see.
