Originally Posted by hidextra.com

Hi,

your bulb type is below

1993 MAZDA RX-7

High & low beam headlamp
9003=H4

You have two choices for the H4/9003 (H4=9003) (hi/lo and bi-xenon)
hi/lo means your low beam is HID and high beam is Halogen because this bulb type has two bulbs in one bulb base to go from low to high beam.
And the bi-xenon means both your low and high beams will be HID.


Here is the link to your H4/9003 hi/lo 6000K ($60 after coupon code: fspecial-m)
http://www.hidextra.com/HID+Conversi...rsion+Kit.html

Here is the link to your H4/9003 bi-xenon 6000K ($90 after coupon code:fspecial-m)
http://www.hidextra.com/HID+Conversion+Kits/Automobile+HID+Kits/H4+Bi-Xenon+HID+Kit/H4+Bi-Xenon+6000K/H4+Bi-Xenon-6000K+Automobile+Xenon+HID+Conversion+Kit.html



You will not need anything extra the kit comes with everything you need (2 bulbs, 2 ballast, 2 wire harness(or relay + wire harness for bi-xenon) and 2 adhesive pads and some zip ties.

let meknow if you need anything else.
Thanks~

Michelle

Originally Posted by forcedis

Hi,
I have the same car 93 FD - i'm looking at the 6000K Bi-Xenon.
it says with relay + wire harness,

Is this a plug and play kit?

Originally Posted by 93vrfd_houston

hey Michelle thanks for the kits. i received both of them yesterday and according to the pics everything looks to be in order.

thanks again, mark

p.s. i'll be installing them in a few weeks when i get home, i'll let you know how it goes.

Originally Posted by FC3S_nataku

hey can you guys help me build a kit to go with the fc2000 front bumper?

Originally Posted by CUBA6942

How can i pay??? I dont have paypal..

Originally Posted by 93RedDragonFD

wolfman,

What did you connect your (red) power wire to? And plug in the 3 prong plug to the connector if you haven't already.

Also, my battery is behind my passanger seat so I plugged it up to my alternator for power. My drivers side light keeps going out after a few minutes and will only come back on if I turn of all the lights then turn them all back on, but it still goes out after the same amount of time??

Other HID stays on... maybe i need to extend the wire to reach my battery?... any help with this problem would be great, thanks!

Originally Posted by wolfman

I bought the Bi-Xenon kit and there is only 1 connector to plug into the stock 3-prong harness. My other stock harness has nothing to plug into it. Should it just hang there not connected to anything? Is my kit missing something?

I installed everything and the headlights do not work. Can anyone offer advice before the weekend is over?!

Originally Posted by FCV3RT

do you have anymore pics of the 5k and 4ks im ordering a set tomorrow jsut cant make up my mind on what color temp. lol and also could you send me a link for the h4 conversion. thanks alot.