FC and FD stainless dual sheath oil metering pump lines
#51
fittings left remaining; enough to do either one FC set or 2 FD sets before i have to require sending in a core set of the banjo fittings to build off of.
if you supply your own fittings then the price will be reduced by as follows:
1 FD set of line ends: 2 small, 2 large banjos= $5
1 FC set of line ends: 4 small, 4 large banjos= $10
preferably not rust pitted, they will be thoroughly processed but i won't sell lines with rotted out banjos.
if anyone has old unused junk lines/fittings sitting around and wants to collect on the above prices let me know. just snip off the old vinyl tubing at the end of the banjo fitting and send the banjos themselves, even a standard envelope will work for single sets of fittings.
shipping information is:
Rotary Evolution
4375 West Reno Ave #6
Las Vegas, NV, 89118
phone: 702-277-9846
additionally if anyone has any issues with fitment let me know, the stock configuration should fit both stock and modified setups but i haven't had any feedback on any fitment issues yet so hopefully all is well.
nearly 20 sets sold in one month, thank you all for your support!
-Ben
if you supply your own fittings then the price will be reduced by as follows:
1 FD set of line ends: 2 small, 2 large banjos= $5
1 FC set of line ends: 4 small, 4 large banjos= $10
preferably not rust pitted, they will be thoroughly processed but i won't sell lines with rotted out banjos.
if anyone has old unused junk lines/fittings sitting around and wants to collect on the above prices let me know. just snip off the old vinyl tubing at the end of the banjo fitting and send the banjos themselves, even a standard envelope will work for single sets of fittings.
shipping information is:
Rotary Evolution
4375 West Reno Ave #6
Las Vegas, NV, 89118
phone: 702-277-9846
additionally if anyone has any issues with fitment let me know, the stock configuration should fit both stock and modified setups but i haven't had any feedback on any fitment issues yet so hopefully all is well.
nearly 20 sets sold in one month, thank you all for your support!
-Ben
Last edited by RotaryEvolution; 12-30-11 at 05:51 PM.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM