LS1 w/6speed into 2g Rx7
02-26-04, 01:03 PM
#1
G35 FTW
Thread Starter
Join Date: Dec 2001
Location: Waterloo, Ontario, Canada
Posts: 1,689
Likes: 0
Received 0 Likes
on
0 Posts
LS1 w/6speed into 2g Rx7
Hey guys,
Im about to attempt this swap and was wondering were you had gotten your engine and transmission mounts( I know of Hinson Supercars and am Currently talking to them) from? I wouldn't think that they would be more then $200 bucks. No one is willing to show a picture of the mounts either.
What wiring changes are needing to be done? I know the engine harness(passenger side, and computer) are removed and the drivers harness is trimmed up a bit.
The engines and tranny's I see on ebay go for about $3000-$6299.
Anyone know where to get a better deal on the motor, tranny and all engine accessories and wiring.
Anyone have some good pics on a LS1 completed swap(already seen wrongmotor.com car) and price breakdown.
Thanks
RT
Im about to attempt this swap and was wondering were you had gotten your engine and transmission mounts( I know of Hinson Supercars and am Currently talking to them) from? I wouldn't think that they would be more then $200 bucks. No one is willing to show a picture of the mounts either.
What wiring changes are needing to be done? I know the engine harness(passenger side, and computer) are removed and the drivers harness is trimmed up a bit.
The engines and tranny's I see on ebay go for about $3000-$6299.
Anyone know where to get a better deal on the motor, tranny and all engine accessories and wiring.
Anyone have some good pics on a LS1 completed swap(already seen wrongmotor.com car) and price breakdown.
Thanks
RT
02-26-04, 02:11 PM
#2
Banned. I got OWNED!!!
Join Date: Dec 2003
Location: Nebraska
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Go to this link and you will more than likely find what you are looking for.
http://www.torquecentral.com/index.php?
Later
http://www.torquecentral.com/index.php?
Later
02-26-04, 06:20 PM
#3
I wanta be with the BUC!
Join Date: Jan 2003
Location: Knoxville, TN
Posts: 2,305
Likes: 0
Received 0 Likes
on
0 Posts
For a good cheap engine, and all the accessories, I would watch like collector car trader, ebay, and places like that. And just watch for wrecked corvettes.
Also I don't know if you have thought about it, but if you have that much money to spend on the motor, you can just get a 350-400 block, and get all the parts (like rotating assembly, heads, cam, ..... so on) from summit, jegs, speedway motors, and all that, and get a holly fuel injecton system. And probably have a higher HP motor that you would get from a vett/camaro.
Just a thought...
And make your own motor mounts!
Also I don't know if you have thought about it, but if you have that much money to spend on the motor, you can just get a 350-400 block, and get all the parts (like rotating assembly, heads, cam, ..... so on) from summit, jegs, speedway motors, and all that, and get a holly fuel injecton system. And probably have a higher HP motor that you would get from a vett/camaro.
Just a thought...
And make your own motor mounts!
Thread
Thread Starter
Forum
Replies
Last Post
