No wonder my rear channel sounded like ass:
http://i6.photobucket.com/albums/y21...p/IMG_1375.jpg Fixed while I had the rear appart: http://i6.photobucket.com/albums/y21...p/IMG_1373.jpg http://i6.photobucket.com/albums/y21...p/IMG_1385.jpg Front feed for Pez's Harness: http://i6.photobucket.com/albums/y21...p/IMG_1370.jpg Battery Relocation: http://i6.photobucket.com/albums/y21...p/IMG_1379.jpg http://i6.photobucket.com/albums/y21...p/IMG_1378.jpg http://i6.photobucket.com/albums/y21...p/IMG_1374.jpg http://i6.photobucket.com/albums/y21...p/IMG_1387.jpg http://i6.photobucket.com/albums/y21...p/IMG_1388.jpg http://i6.photobucket.com/albums/y21...p/IMG_1389.jpg http://i6.photobucket.com/albums/y21...p/IMG_1390.jpg http://i6.photobucket.com/albums/y21...p/IMG_1391.jpg |
Gauges mounted:
http://i6.photobucket.com/albums/y21...p/IMG_1395.jpg Dimmer controller: http://i6.photobucket.com/albums/y21...p/IMG_1393.jpg JTR 1 7/8th Headers installed: (Thanks AHarda for the tips, Drivers Side: Move fuse box out of the way, remove coils and the header can be installed from the top / Pass Side: Support motor, remove starter and engine pedestal, install from below) http://i6.photobucket.com/albums/y21...p/IMG_1401.jpg Also, the ammount of tranny tunnel modification I did prior was perfect on the drivers side. Plenty of clearance. Power Harness: http://i6.photobucket.com/albums/y21...p/IMG_1402.jpg http://i6.photobucket.com/albums/y21...p/IMG_1403.jpg http://i6.photobucket.com/albums/y21...p/IMG_1404.jpg GTO Shifter: http://i6.photobucket.com/albums/y21...p/IMG_1394.jpg Need to lift the front a bit: http://i6.photobucket.com/albums/y21...p/IMG_1407.jpg http://i6.photobucket.com/albums/y21...p/IMG_1405.jpg Startup Vid: (Smoke is the ceramic headers setting) http://www.youtube.com/watch?v=ZqlTG_rPHWY First Drive Vid: http://www.youtube.com/watch?v=FJL9GhJ1BHs We have a better vid once the brakes were sorted out, but I'm waiting for my friend to get it off his phone lol That should be it for now. Questions? Comments? Concerns? |
Looking/sounding great! I need shiny headers like that.
|
very nice man, sometimes I think I should've done this.
|
I gotta switch to Samberg radiator set up...just looks so clean compared to Hinson.
|
Samberg setup is the bees knees. Fitment is probably 90%, but there are fixes:
http://www.norotors.com/index.php?to...8.msg75508#new Justin is aware and supposibly the next revision will accomidate for it. |
I love it... totally reminds me of my 1st drive.. my car sounded almost exactly the same (open stock manifolds). Great job. It's a great feeling to drive it around for the first time.
|
Super late updates... Lets see what's happened:
Since I have a fbody ps pump it doesn't play nice with the FD steering rack and overdrives it due to the higher flow rate, so I installed a smaller orifice fitting from Turn One. This is the fitting you need for the Fbody pump: MFG@TUR11 with .093 orifice (As per Jeff @ Turn One) Installed mine over the weekend, car drives WAAAAY better now. Protip: Thin wall, deep socket 22mm is your friend. Stock vs Turn One fitting: https://i6.photobucket.com/albums/y2...4-30123353.jpg https://i6.photobucket.com/albums/y2...4-30123413.jpg Swapped the GTO shifter out in favor of a MGW shifter. Super short and crisp shifts now, no more missing 3rd gear: https://fbcdn-sphotos-a.akamaihd.net..._3885650_n.jpg https://fbcdn-sphotos-a.akamaihd.net..._1697815_n.jpg https://fbcdn-sphotos-a.akamaihd.net...01872108_n.jpg Also plopped it on the dyno and got it tuned finally: Also picked up the following parts: - Efini steering wheel - 94 Finish AC panel and Brand New 94 finish (Someone was hoarding it) shifter panel - Shine Auto hood (Thanks again papsmagu) New pics should be up sooner than later... |
Couple quick shots of the new look:
- Wingless - Efini Badges - Shine Auto Feed Hood - 99+ Lip https://fbcdn-sphotos-a.akamaihd.net...98455124_n.jpg https://fbcdn-sphotos-a.akamaihd.net...43950712_n.jpg https://fbcdn-sphotos-a.akamaihd.net...51186999_n.jpg |
Mini Update:
- I have been slowly acquiring 94+ interior bits to replace the restored 93 pieces - Received some Shine CF Feed side skirts and their Low-Profile CF spoiler - Starting on my custom Speedhut gauge setup I should have some new pics up this weekend. |
lets get some pics and did you have to cut a larger hole to fit the hinson mc and adapter?
|
Weather has been terrible in S FL so haven't gotten any pics yet.
For the Wilwood master you need to hone out the hole a bit for clearance forthe tapered lip on the Master that holds the boot. The reason for this is the firewall in FDs are multilayer and depening on how they were assembled they can be mis-aligned. Few minutes with a barrel bit and a dremel and you will be good to go. |
Originally Posted by BlinD26
(Post 10978296)
Super late updates... Lets see what's happened:
Since I have a fbody ps pump it doesn't play nice with the FD steering rack and overdrives it due to the higher flow rate, so I installed a smaller orifice fitting from Turn One. This is the fitting you need for the Fbody pump: MFG@TUR11 with .093 orifice (As per Jeff @ Turn One) Installed mine over the weekend, car drives WAAAAY better now. Protip: Thin wall, deep socket 22mm is your friend. Stock vs Turn One fitting: https://i6.photobucket.com/albums/y2...4-30123353.jpg https://i6.photobucket.com/albums/y2...4-30123413.jpg Swapped the GTO shifter out in favor of a MGW shifter. Super short and crisp shifts now, no more missing 3rd gear: https://fbcdn-sphotos-a.akamaihd.net..._3885650_n.jpg https://fbcdn-sphotos-a.akamaihd.net..._1697815_n.jpg https://fbcdn-sphotos-a.akamaihd.net...01872108_n.jpg Also plopped it on the dyno and got it tuned finally: V8 Powered RX7 Dyno Tune - YouTube Also picked up the following parts: - Efini steering wheel - 94 Finish AC panel and Brand New 94 finish (Someone was hoarding it) shifter panel - Shine Auto hood (Thanks again papsmagu) New pics should be up sooner than later... Let me know when you buy the Shine CF rear diffuser. I have some CF Vortex Generators that i have sitting on the shelf that i will sell really cheap. never installed and brand new. Again, great work and good looking car. Question, do you have to change your tag? its technically not an R1 anymor right :blush::blush::blush: |
I'm looking at the Street Diffusor, aren't the generators for the RE-Pro?
And technically it's still an R1, still has a hardtop, suede seats, no bose, etc :beer:
Originally Posted by papsmagu
(Post 11203259)
Let me know when you buy the Shine CF rear diffuser. I have some CF Vortex Generators that i have sitting on the shelf that i will sell really cheap. never installed and brand new.
Again, great work and good looking car. Question, do you have to change your tag? its technically not an R1 anymor right :blush::blush::blush: |
Took the car out to a local meet over the weekend and someone snapped a few shots:
https://sphotos-b.xx.fbcdn.net/hphot...77483401_o.jpg https://fbcdn-sphotos-d-a.akamaihd.n...99549362_o.jpg https://sphotos-a.xx.fbcdn.net/hphot...76894396_o.jpg https://fbcdn-sphotos-a-a.akamaihd.n...10041471_o.jpg https://fbcdn-sphotos-c-a.akamaihd.n...23147574_o.jpg |
Beautiful!
Love that wing. |
nice pics
|
Very nice
|
Beautiful!
|
Originally Posted by EviLPeNeviL
(Post 9531753)
Awesome work, do you have any shots of the interior all done and put back together? Want to see what the outcome looks like.
|
Originally Posted by hrc
(Post 11513000)
2nd!
https://fbcdn-sphotos-e-a.akamaihd.n...91388680_o.jpg |
Ugh! Soooo want the ls6 badge for mine!
|
amazing shots of the car
|
Amazing set up!
|
i thought this car looked familiar, seen it on a youtube video,
I actually traded for a black ls1 fd in boca raton earlier this year - awesome build! |
Nice build!
|
awesome build
|
Awesome build! Love the gauges!
|
Love the detail!! great work..
|
Nice attention to detail and great work.
|
nice build so far!
|
do you have any photos of the ecu mounting?
|
Nothing special, it's just behind the rug on the passenger side. I haven't found anything fancy due to the size of the LS ECU
|
That first drive video had me laughing my butt off. "you dont have to rev it to 5grand to move it" lmao
|
Looks very nice
|
attention to detail is immaculate, great work!
|
Originally Posted by AtlxPat
(Post 11532050)
i thought this car looked familiar, seen it on a youtube video,
I actually traded for a black ls1 fd in boca raton earlier this year - awesome build! |
All times are GMT -5. The time now is 04:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands