Pacific Raceways Test n' Tune Video Runs
#1
Tokyo Drift Sellout
Thread Starter
Join Date: Feb 2005
Location: Seattle
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
Pacific Raceways Test n' Tune Video Runs
A couple of my roommates, 13bpower, NoRotor, and our 4th sudo roommate eriksseven I went down to the track and got a few runs in two weeks ago, friday the 23rd.
I wasn't looking like it was going to be really that busy, but little did we know that it was a friggin' Harley Bike weekend
So to make a long story short it was a lot of sitting and waiting for not very many runs. I only got 3 but mainly because I stopped to hook up and film the other guys.
But overall it was a fun night.
I only rolled for a little bit but I put together a quick little vid so I thought I would share:
http://www.youtube.com/watch?v=1bqzseUxlDw
For those who are wondering, I did run a vehicle my Coupe:
91' Jetta Coupe vr6
-freshly rebuilt with a 1mm overbore
-lightened flywheel
-Full 2.5" exhuast (cat delete)
I had a good amount of gas and all my crap from work, IE: camera gear, tripod, clothes shoes and what not.
I only took three runs and I improved a tenth of a second every pass I took. I just need to get my 60' times down and take out some un-needed weight.
Anyway the slips where something like this:
Run 1:
14.9 @ 93 , chilled on the launch and early shifted just to see what it would do on a lazy run
Run 2:
14.8 @ 96, victory burn out through 1st and taking it to 6.5k
Run 3:
14.7 @ 96, still spinning through most of 1st but a little better run
It was a good first outing and Im pleased with fist results
enjoy
I wasn't looking like it was going to be really that busy, but little did we know that it was a friggin' Harley Bike weekend
So to make a long story short it was a lot of sitting and waiting for not very many runs. I only got 3 but mainly because I stopped to hook up and film the other guys.
But overall it was a fun night.
I only rolled for a little bit but I put together a quick little vid so I thought I would share:
http://www.youtube.com/watch?v=1bqzseUxlDw
For those who are wondering, I did run a vehicle my Coupe:
91' Jetta Coupe vr6
-freshly rebuilt with a 1mm overbore
-lightened flywheel
-Full 2.5" exhuast (cat delete)
I had a good amount of gas and all my crap from work, IE: camera gear, tripod, clothes shoes and what not.
I only took three runs and I improved a tenth of a second every pass I took. I just need to get my 60' times down and take out some un-needed weight.
Anyway the slips where something like this:
Run 1:
14.9 @ 93 , chilled on the launch and early shifted just to see what it would do on a lazy run
Run 2:
14.8 @ 96, victory burn out through 1st and taking it to 6.5k
Run 3:
14.7 @ 96, still spinning through most of 1st but a little better run
It was a good first outing and Im pleased with fist results
enjoy
#2
Make Money.
iTrader: (6)
Wow, hella good video B'... Too bad the footage wasn't very spectacular (although I must say for google video, the shots were amazing).
Street footy > track footy (like skating 'park', lol)...
BTW, for those that think that I 'bested' the LT-1 '7 (because all you saw was the what, 14.3?), it's not true. My best was a 13.6 and his was a 13.5--however my traps were a couple MPH faster IIRC.
Street footy > track footy (like skating 'park', lol)...
BTW, for those that think that I 'bested' the LT-1 '7 (because all you saw was the what, 14.3?), it's not true. My best was a 13.6 and his was a 13.5--however my traps were a couple MPH faster IIRC.
#6
Tokyo Drift Sellout
Thread Starter
Join Date: Feb 2005
Location: Seattle
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by wangerrr
Off topc, Bryce...did you really do the unthinkable? The biggest Nooba-looba move in the world? I don't know if I believe it. i'm very dissapointed...
Im almost doubling my money
Getting a 98' Commuter/Beater car
And going in on a project FC with E for his wrench time and for both of our sideways enjoyment.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM