First time at track, horrible time... Need help
#1
Full Member
Thread Starter
Join Date: Sep 2003
Location: Las Vegas, Nevada
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
First time at track, horrible time... Need help
I have a 1988 RX7 SE 5-spd...
-Completely Stock
-Vibration at high rpm
-Tires bad from off-roading
-150,000 miles
ok heres the slip:
R/T... 1.633
60`... 2.730
330... 7.835
1/8... 11.968
MPH... 58.57
1000... 15.551
1/4... 18.542
MPH... 75.67
How do I know if my 6th ports are opening?
-Completely Stock
-Vibration at high rpm
-Tires bad from off-roading
-150,000 miles
ok heres the slip:
R/T... 1.633
60`... 2.730
330... 7.835
1/8... 11.968
MPH... 58.57
1000... 15.551
1/4... 18.542
MPH... 75.67
How do I know if my 6th ports are opening?
#2
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
To test them, T in a pressure gage and blow into the tube to check at what pressure they open.
Then route the tube inside with the gage on the end, and do a test drive to see when they open.
When they stick, it's usually the shaft & not the internal sleeves.
Just put some penetrating oil where the shaft goes into the LIM.
Then route the tube inside with the gage on the end, and do a test drive to see when they open.
When they stick, it's usually the shaft & not the internal sleeves.
Just put some penetrating oil where the shaft goes into the LIM.
Thread
Thread Starter
Forum
Replies
Last Post
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM
rx8volks
Canadian Forum
0
08-13-15 04:55 AM
rx8volks
Canadian Forum
0
08-11-15 10:30 PM