battle of the imports report
#1
Laying Down Rotary Law
Thread Starter
battle of the imports report
Well I attended the street tuner class
http://www.battleoftheimports.com/home.html
1st pass one of my intercooler hoses started to leak(found out later)
12.0@122 2.0 60' foot
(low boost no cage installed)
another qualifying pass
low 13's no boost (all -motor)
1.79 60" foot
intercooler hose in the front had come apart at the bottom of the clamp
found it and fixed it
1st round Eliminations
me vs 2jz turbo lexas <--was running low 11's
turn the boost controller to high
revved good this time
bang! 1.56 60' foot
car took off like a rocket!!
had the lex by 3 cars
but I broke 3rd gear
had to let off
That would of been a nice 10 second pass for sure
damm ACT extreme presure plate is too much I'm quessing
race specs-
ET streets
stock springs
stock struts
KYB AGX shocks (#3 setting)
20 PSI (high boost setting)
stock diff and axles
Oh well that tranny had alot of milage and abuse on it
I got a low mi S5 tranny i'll be replacing with
I'll rebuild the S4 and have it cryo treated
Now Ijust need a pressure plate that can handle 450lbs of torque
and not be as aggresive as the ACT Extreme PP
Till next time.....................
http://www.battleoftheimports.com/home.html
1st pass one of my intercooler hoses started to leak(found out later)
12.0@122 2.0 60' foot
(low boost no cage installed)
another qualifying pass
low 13's no boost (all -motor)
1.79 60" foot
intercooler hose in the front had come apart at the bottom of the clamp
found it and fixed it
1st round Eliminations
me vs 2jz turbo lexas <--was running low 11's
turn the boost controller to high
revved good this time
bang! 1.56 60' foot
car took off like a rocket!!
had the lex by 3 cars
but I broke 3rd gear
had to let off
That would of been a nice 10 second pass for sure
damm ACT extreme presure plate is too much I'm quessing
race specs-
ET streets
stock springs
stock struts
KYB AGX shocks (#3 setting)
20 PSI (high boost setting)
stock diff and axles
Oh well that tranny had alot of milage and abuse on it
I got a low mi S5 tranny i'll be replacing with
I'll rebuild the S4 and have it cryo treated
Now Ijust need a pressure plate that can handle 450lbs of torque
and not be as aggresive as the ACT Extreme PP
Till next time.....................
#2
damn its good to hear from you kabooski. Still having clutch probs, damn. Please get them worked out soon so you can tell me what holds because I will be running 20lbs on a 67 as well here hopefully soon.