my NA trapped 88mph in the 1/4. all i had was intake/exhaust/mild weight reduction and it was a 15.5@88

in my 87 se i ran 15.9@ 88 mph with open rb header portes wireed open , no air filter, with 215's . really bad launch tho i know i can do better....

i believe my 15.5 run was a 2.23 60ft

i ran 19.9 with intake and exhaust LoL... but then I ran 15.34 and that was cool... my dad ran a 15.14 in my car with a RT of 0.08 seconds (which sounds like bulshit i know) but my rt is .2 or lower usually... idk... what kind of rt's do u all have?

I thought a perfect rt was .500? Like that was the lowest you could get?

god these cars are slow. like roy james sayed i ran a mid 14 with the same mods mr hks has and alittle bit of weight deduction

not bad

reaction time has nothing to do with ET unless its bracket racing.

the timer doesnt start until the car launches. so you can sit on the line for 10 seconds and run a 15.5

the guy i bought my gxl from ran a 16.3 with just an intake, spinnin em down the track...not bad i guess

my friend was running constant 16.0 w/ a r/b exhaust and bad tires...the engine at that time had about 90k miles on it

Agreed. That's why I stuck with DSMs for so long. But I didn't buy this thing for straight line speed anyway, so I don't feel much of a loss.

Hightest mph was a 15.1@97.92mph in my old S5 n/a Rx-7. No weight reduction whatsoever. Best time was a 14.9@93~94mph(?) Before the BS flag is raised, do a search with my name, and find out how much power my car was making, and what was done to it. :D CJ

please give more infor on where to find what mods and how much power you had? I just want to compare my times and my HP numbers after the dyno in a week or too, Mainly i want to know if your motor was poorted cause i think my time is damn good for my mods

I just Gteched a 15.5 @ 95, and another time a 15.6 @ 97 . . .

What do good drivers run with a ~96 mph car?

Street port, ported intake, and *stock* exhaust. :eek:

uhm... ~96 mph should be in the 14's i'd think, or at least low 15's. My 15.3 run with my shitty 60' of 2.35 trapped a 90.70

I've got a date with a real track in a week. My header will be where it belongs - on the car!

i ran 15.9@85 mph with open header and no airfilter in my 87 se

I just ran a 15.56@90.13 in my Sport. My 3rd gear is all buggered, which destroyed my chances at doing any better.

Lack of power was felt in my car in 3rd gear if my car pulled in 3rd like it dos in 1st and 2nd then i'd be in low 14s. But NMext I am going to get a header, MSD ignition, and spriings. I still have yet to run my car at the track since i ported the tb, did the tb mod, and got new wheels and tires and an lsd. Those mods since i've been to the track should put me intoo 14s. I'm hoping for a ,mid 14 on the stock ports, then i'll port

That's gearing 101. The actual wheel torque drops in every gear, of course 1st will pull harder then second, second harder then 3rd, etc.

The only way to make 3rd pull harder is to put in shorter gears or add power.;)

actually consistent low 14's with the mph and 2.2 or worse 60 ft.

work on that r/t and u can pick up alot of time!

work on that r/t and u can pick up alot of time!

r/t has nothing to do with ET unless its a bracket race.

you can sit at the line for 20 seconds an run a 15.5

wired open ports sucks for just cruising around on the street and coming around a street corner in third and its at like 2k rpm and it takes forever to accel cause theres no low end power. but i have straight pipes and so no backpressure to open them with so i took them off. im doing the s4-s5 IM swap so im gonna wait to try any of the actuator opener mods till then.as soon as i hit about 3500rpm it pulls perfectly fine.