Time Slips and Dyno Section is for posting 1/4 mile time slips and dyno graphs

Gen2 6266 with water meth, nearly maxed out.

Thread Tools
 
Search this Thread
 
Old Nov 16, 2017 | 06:23 PM
  #1  
13Bseries's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: Jan 2011
Posts: 65
Likes: 0
From: Portland
Gen2 6266 with water meth, nearly maxed out.

Ive been running this boost level for a while now but finally got it on the dyno to see the actual numbers. This run was at 26 lbs on pump gas with water meth ( devils own 50/50 mix with 500cc jet). I'm fairly confident theirs more left in the turbo as the turbo is still holding boost to redline. It broke up just a tad because of my plugs, i went in thinking i should have swapped them out but ran out of time. This run was 565 hp with 490 tq

https://www.facebook.com/hoangpham13/videos/10155253055789401/
Attached Thumbnails Gen2 6266 with water meth, nearly maxed out.-vip-dyno-sheet.jpg  

Last edited by 13Bseries; Nov 16, 2017 at 06:44 PM.
Reply
Old Dec 11, 2017 | 05:10 AM
  #2  
Ricebox's Avatar
Full Member
iTrader: (3)
 
Joined: Nov 2016
Posts: 230
Likes: 26
From: FL
What A/R?
and engine specs?
Reply
Old Dec 11, 2017 | 02:07 PM
  #3  
13Bseries's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: Jan 2011
Posts: 65
Likes: 0
From: Portland
It’s a medium sized street port, stock seal motor. Haltech ps1000, 1700cc/2000cc ID injectors. AEM water meth kit 50/50 mix, 500cc jet. The turbo is 1.0 AR and what ever the stock front cover comes with.
Reply




All times are GMT -5. The time now is 07:17 PM.