752RWHP Street Car!
Hey guys. I went to a dyno shootout yesterday at PFSupercars and put down more power than prior. I was pleased considering how much abuse this motor has gone through since the summer.
http://www.youtube.com/watch?v=rTeKQPUnzCc It would have made more if my ecu didn't reset itself at the top of the run dumping a ton of fuel in. THis summer Im adding 2 more fuel injectors so I can run more boost. Right now Im out of injector so I can't run anymore boost. We should hit over 800rwhp with the new setup. |
:shocking: what do you do when emmisions comes for you?
|
Why did the boost fall off a bit then pick back up? Was that the fuel dump?
|
damn, that sounds nasty :naughty:
|
Not sure why the boost went up and down. It was only a few psi, but it would still loose about 20rwhp by doing that. I have an AVCR now, but will be going to the same boost controller Paul Efontis and other racers use. It was designed by Chris Rado, I believe.
|
fuckin sick man
|
that was the hardest launch i think ive ever seen. that shit too off like a rocket ......damn
|
|
I was at PF Supercars yesterday, and that dyno run was impressive.
Never met Ernie before, and he took the time to talk to everyone, and answer any questions we had. Congrats:icon_tup: |
All I have to say is WOW! You got to get my brother (Goodfellafd3s) to get up to those numbers, LOL. Amazing car Ernie! Good luck with it!
Ryan |
Ridiculous Ernie. Hope to see you at JPR this spring.
|
I think i just messed in my pants :p
|
Ern, I love the sound of the idle at the end of the vid. Simply nuts, you have to be off your rocker :lol:
|
balls out!
|
Ernie, ur car is absolute Siickness. Plz keep us posted when you get new results after the injectors. :icon_tup: :icon_tup: :icon_tup:
|
i am so close, yet so far away...
once i get my intercooler and my thowout berring i will be on my way to pfs. i just dont know how long that will be :( do you keep your fd there on display? |
ECU reset itself? Yikes, that's not good. Why would that happen?
Is it just me, or does 700+ rwhorse seem a little excessive for a street car ;) Congrats on the numbers and car. Care to comment on how much the build cost? |
Originally Posted by mdpalmer
(Post 7755676)
Is it just me, or does 700+ rwhorse seem a little excessive for a street car ;) Congrats on the numbers and car. Care to comment on how much the build cost?
congrats ernie all you need to make big hp #'s is a huge turbo @ about 30-34 psi, 4 160 lb injectors fed by the biggest fuel pump you can get your hands on and a good tuner, a bridgy helps too ;) thats the short-short version cost? a butload!! |
Originally Posted by 680RWHP12A
(Post 7755711)
yah, its way too much power to use on the street, but its great bragging rights :)
congrats ernie all you need to make big hp #'s is a huge turbo @ about 30-34 psi, 4 160 lb injectors fed by the biggest fuel pump you can get your hands on and a good tuner, a bridgy helps too ;) thats the short-short version cost? a butload!! |
Very nice. Thats some insane amount of power? When are we going to see some low 9s?
|
What's the name of the new boost controller you're going to run? I was interested in getting the AVCR... If you know of a better unit I would like to follow in your footsteps.
|
I'm assuming its one of these: http://www.world-motorsports.com/wms...&products_id=1
|
Yup, that's the one that Rado designed. One bad mofo, and you'll know it every time you look at the receipt ;)
|
You ain't kidding. Shit I think If I was going to run 60psi I wouldn't even run a wastegate...
|
Originally Posted by GoodfellaFD3S
(Post 7757871)
Yup, that's the one that Rado designed. One bad mofo, and you'll know it every time you look at the receipt ;)
back in the day we used to race together in the street class (he ran his supra and really did daily drive it! on c16 too!!!) and party alot that boost controller was years in the making, and is worth every penny,even if you have to pay retail |
wow. congrats, Ernie. i thought you had sold that motor though. didn't you say you were going to pursue a ... ahem ... "big block" setup?
anyway, i'm with GoodfellaFD3S. the sound of the idle after the dyno run was orgasmic. 800 is a few painstaking hours away. |
PBC-1 Comparison? As it's 3X less expensive...
|
Nice but if you can't make the power on pump gas and pass emissions, its not really a street car is it? Still very impressive numbers.
|
maybe we should change it to 752rwhp street DRIVEN car
|
Originally Posted by Rotary Experiment Seven
(Post 7789076)
Nice but if you can't make the power on pump gas and pass emissions, its not really a street car is it? Still very impressive numbers.
|
Originally Posted by mono4lamar
(Post 7759358)
PBC-1 Comparison? As it's 3X less expensive...
|
impressive
|
Cobra is sold. Got tired of messing with it.
|
Originally Posted by ErnieT
(Post 7789801)
What is PBC-1?
|
ive had your car on my myspace for awhile lol. your car launches HARD
|
Wow, nice, nice!!!!!!
|
Originally Posted by Specter328
(Post 7798140)
It's the other boost controller from World Electronics- http://www.world-motorsports.com/wms...86ecee465dbe47
|
SO whats the best your car has laid down in the 1320? 60 foot? mph? You thinking about coming down this year for the Speed for Sale event? We could use a 9 second rotary!
|
Originally Posted by sk8world
(Post 7889672)
SO whats the best your car has laid down in the 1320? 60 foot? mph? You thinking about coming down this year for the Speed for Sale event? We could use a 9 second rotary!
You have any info on the speed for sale event? I don't know anything about it.. |
Originally Posted by ErnieT
(Post 7890270)
I havn't got a clean pass yet, but my best et is a 10.04@144mph. My best 60' is a 1.42
You have any info on the speed for sale event? I don't know anything about it.. Not yet, but I am sure someone will let you know as soon as a date is set up. It would be nice to have some nice rotary's this time around at the track. We had a great car for the road coarse but lacked in the 1320. Were the supras and Z's were running strong! |
Yeah , I was at Steele for that one ... Supras owned the 1/4 mile that day ... hope to see THIS car there next time :)
|
That's amazing! I think good job is an understatement...
|
Originally Posted by ErnieT
(Post 7890270)
I havn't got a clean pass yet, but my best et is a 10.04@144mph. My best 60' is a 1.42
You have any info on the speed for sale event? I don't know anything about it.. The event will be ran even smoother this year and hopefully we will have more fds. We paid for full race insurance on the road coarse this coming year which means we will have a time attack at the end of the day. Should have a decent amount of Supras, FDs, 300zxs, GTRs, and even a couple old school skylines. I would sure love for Ernie to bring his car, it would give us a good chance on the dragstrip and the FDS could almost clean sweep the event, we still need a 20b GT45r car to show up if we want a chance at winning the dyno competition.:) |
Sounds good. I'll be there.
|
bejeezus dickenz
|
dam it i hate surfing at work i cant watch da vid
|
Originally Posted by ErnieT
(Post 7789801)
What is PBC-1?
|
awesome vids on youtube, Ernie, the car leaps off the line, I'm shocked you aren't mid 9s
|
wow! very fast, nice built ;)
|
Originally Posted by GoodfellaFD3S
(Post 7757871)
Yup, that's the one that Rado designed. One bad mofo, and you'll know it every time you look at the receipt ;)
|
All times are GMT -5. The time now is 04:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands