RXILVER7

iTrader: (2)

I tried using the search function but was lost in a sea of for sale threads. So will stock FD3S wheels (from a 93) fit on a 5 lug FC3S?

thanks

Rxmfn7

iTrader: (4)

You will need spacers, I believe 25mm. Contact Rishie at autoRnD I think he has them in stock.

Mahjik

iTrader: (1)

Did you check the 2nd Gen FAQ?

https://www.rx7club.com/2nd-generation-specific-1986-1992-17/frequently-asked-questions-2nd-generation-rx-7-faq-fc-494667/

RXILVER7

iTrader: (2)

Thanks for the link. That was really helpful. I was thinking about putting my stock 16s on an FC. Does anyone know if I use this wider wheel and spacers, will I need fender flares?

sharingan 19

iTrader: (16)

No.

RXILVER7

iTrader: (2)

Yeah i found out you need the spacers. I believe they are 20mm for the front and 25mm for the rear

smog-guy707

iTrader: (11)

i thought it was 10mm?

Cosmo_TT

iTrader: (11)

there is a 10mm difference in the offset but you have to remember that the fd wheels are also an inch wider and you need to calculate that into the measurement of the spacer

Howard Coleman

iTrader: (6)

FD wheels on the FC are a great mod. light and fit the chassis well w spacers and longer wheel studs. i probably logged 150,000 miles on such a setup.

i don't recall the spacer thickness but i remember finding the longer studs at SpeedSource
(Fl, Sylvain Trembley).

hc