Wheel And Tire Help Please
#1
Junior Member
Thread Starter
Join Date: Oct 2016
Location: Edmonton
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Wheel And Tire Help Please
I feel bad even posting this question, but without being able to test fit these wheels and tires I'm very concerned I will make a mistake.
These are not good tires, and they have low tread, so I care more about the wheels then anything. These are a phenomenal deal I found locally.
I would appreciate the communities help... How will these fit, and what spacer do you think I will need to run these.
Wheels = 18x8.5 (Front)
18x9.5 (Rear)
Tires= 245 40 18 (Front)
265 40 18 (Rear)
#4
Original Gangster/Rotary!
iTrader: (213)
They're 5x114.3mm (4.5 inch) and center bore of 67.1mm or larger?
Mustang fitment I'll bet..... those tires are too tall for an FD, sidewall should be a 35 aspect ratio vs a 40. OD for those tires is 25.7 inch front and 26.5 inch rear, for an FD you want to keep the front very close to 25 inches and the rear similar although some go as high as 25.7 or so.
I'll also bet that setup weighs a ton. I hope they're a screaming deal
Mustang fitment I'll bet..... those tires are too tall for an FD, sidewall should be a 35 aspect ratio vs a 40. OD for those tires is 25.7 inch front and 26.5 inch rear, for an FD you want to keep the front very close to 25 inches and the rear similar although some go as high as 25.7 or so.
I'll also bet that setup weighs a ton. I hope they're a screaming deal
#5
Junior Member
Thread Starter
Join Date: Oct 2016
Location: Edmonton
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
They're 5x114.3mm (4.5 inch) and center bore of 67.1mm or larger?
Mustang fitment I'll bet..... those tires are too tall for an FD, sidewall should be a 35 aspect ratio vs a 40. OD for those tires is 25.7 inch front and 26.5 inch rear, for an FD you want to keep the front very close to 25 inches and the rear similar although some go as high as 25.7 or so.
I'll also bet that setup weighs a ton. I hope they're a screaming deal
Mustang fitment I'll bet..... those tires are too tall for an FD, sidewall should be a 35 aspect ratio vs a 40. OD for those tires is 25.7 inch front and 26.5 inch rear, for an FD you want to keep the front very close to 25 inches and the rear similar although some go as high as 25.7 or so.
I'll also bet that setup weighs a ton. I hope they're a screaming deal
Yes, they're 5x114.3mm and have a center bore of 67.1mm
Your exactly right. They were off of a Foxbody Mustang.
The tire size is 245-40-18 (Front)
265-40-18 (Rear)
#6
Junior Member
Thread Starter
Join Date: Oct 2016
Location: Edmonton
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
They're 5x114.3mm (4.5 inch) and center bore of 67.1mm or larger?
Mustang fitment I'll bet..... those tires are too tall for an FD, sidewall should be a 35 aspect ratio vs a 40. OD for those tires is 25.7 inch front and 26.5 inch rear, for an FD you want to keep the front very close to 25 inches and the rear similar although some go as high as 25.7 or so.
I'll also bet that setup weighs a ton. I hope they're a screaming deal
Mustang fitment I'll bet..... those tires are too tall for an FD, sidewall should be a 35 aspect ratio vs a 40. OD for those tires is 25.7 inch front and 26.5 inch rear, for an FD you want to keep the front very close to 25 inches and the rear similar although some go as high as 25.7 or so.
I'll also bet that setup weighs a ton. I hope they're a screaming deal
All wheels are in immaculate condition, and the rear tires have 50% tread, Fronts have 80%