Check out this link and let me know what you think, & if they will fit?

http://cgi.ebay.com/ebaymotors/18-Ti...4284QQtcZphoto

Thanks,
-Dustin

 

http://www.fc3spro.com/TECH/MODS/RT/rims.htm

 

ok, so how does...................

FRONT = 225-40-18 on a 8.5'' wheel with 20mm offset

&

REAR = 225-40-18 on a 9.5'' wheel with 20mm offset



sound on an FC.

Thanks,
-Dustin

 

I'm hoping they dont stick out past the fenders......................flush with the fenders is ok though.

=18'' wheels
=225-40 tires all around
=Front-8.5'' wide with 20mm offset
=Rear-9.5'' wide with 20mm offset

thanks,
-Dustin

 

Dude, look at Brody's link, that's your answer.

 

Those wheels look heavy.
If you're trying to run them on a non-turbo, they will probably slow the car down - be aware of that.

The fronts should be okay, but the rears are going to get awfully close to the fender lip - be prepared to roll them especially if you're a lowered.


-Ted

 

excellant, thanks guys. I'll watch the rear set.

-Dustin

 

what about 35mm offset in the front and 45mm in the rear??

-dustin

 

8.5" front and 9.5" rear?

Front would hit stuff inside.
Rears would hit stuff inside.

If you want to fit the 8.5" up front, I would shoot for a +20 to +25 offset.
If you want to fit the 9.5" in the rear, I would shoot for a +30 to +35 offset.

So your new numbers are 10mm too much offset in front and 10mm too much offset in the rears also.


-Ted

 

they are ugly too. super advans all the way

 

to give you an idea:
these are 17x8 front with 28 offset and 17x9 with 27 offset

the rears rub on big bumps....I need to roll the fender lip.

 

^^^ 225/40 front & 255/40 rear

 

sweet! any more wide wheel shots?

 

how bout 17x10.5 +27 285/40/17



hooray! i'll get it flared one of these days.