Has anyone run Wedsport TC105Ns in 17x9.5+32 in the back and a 17x8.5+32 or 9+35 up front? Do they fit without any fender rolling? I searched google and found a few pics but not a whole lot of information. I saw on here a few guys mentioned running them but I still didnt find much information.

I would like to run a 245 up front and a 275 on the back

Thanks for any input

 

I'm going to run the 17x10.5 wide spec SA-72R rears and 17x9 fronts. Without tires the fitment is perfect, hard to see in the pictures but around 4-6mm clearance between the coilovers and about as flush to the fender as possible.

I ordered Nitto NT555R 275/40/R17 rears and Nitto NT05 235/40/R17 fronts. Ideally I would run a 245 and 285/295 but not many choices in that sizing especially from the same brand.

TC105N are one of the most winning time attack wheel in the world, but these SA72R's were specifically designed for cars like ours that want a 1-peice wide fitment wheel.

If you're looking to buy new PM me.

 

Thanks for the reply... I ended up with a set of rpf1s for the time being. Its too much money to drop on a wheel without some sort of feedback on fitment. I really dont want to touch the body of the car to make a wheel fit.

Post some pics of your setup once you get some tires on it. Looks good so far!

 

I ordered a set of 17x8.5 +32's for all 4 corners from Rishie. I'll post some pics once I decide on tires and get them mounted.

His price was best and, more importantly, he KNOWS RX7's. My first wheels from him were almost 10 years ago and he hasn't let me down yet.