Volk Racing / Mazdaspeed
#1
Senior Member
Thread Starter
Join Date: Mar 2001
Location: SF
Posts: 492
Likes: 0
Received 0 Likes
on
0 Posts
Volk Racing / Mazdaspeed
Anyone know where I can get a good price on Mazdaspeed MS-01S or Volk TE37 rims? I'm in Southern California and there are so many shops that I don't even know where to start so I was hoping someone could point me in the right direction.
#2
Formula Mazda Driver
Join Date: Feb 2001
Location: Portland, Oregon, USA
Posts: 680
Likes: 0
Received 0 Likes
on
0 Posts
I am not postive, but I think MS-01's are no longer being produced.
------------------
Jeremy
Black 1990 GTU
Mariah Headers
Bonez Racepipe
Bonez Intake(K&N Cone)
Volk Racing TE-37's 16x8's(shipping)
GC Coilvers
GC Camber/Caster plates
Eibach ERS Springs
Upgraded 4-piston calipers
SS Brake Lines
Hawk HP+ Pads
Brembo X-drilled Rear Rotors
Speedbleeders
AC Removed
P/S Steering removed
AIM - OnlyNDrms3268
------------------
Jeremy
Black 1990 GTU
Mariah Headers
Bonez Racepipe
Bonez Intake(K&N Cone)
Volk Racing TE-37's 16x8's(shipping)
GC Coilvers
GC Camber/Caster plates
Eibach ERS Springs
Upgraded 4-piston calipers
SS Brake Lines
Hawk HP+ Pads
Brembo X-drilled Rear Rotors
Speedbleeders
AC Removed
P/S Steering removed
AIM - OnlyNDrms3268
#3
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Nope, you can get them. They'll have to be shipped directly from HQ in the US but you can get them. You just have to wait an extremely long time....
I've decided to stay with the stock rims....
Later,
I've decided to stay with the stock rims....
Later,
#4
Rotary Freak
iTrader: (22)
I'm in the process of setting up an account and getting prices from a wholesaler for Volks, Racing Hart, etc. They lag severely. Anyways, I'm next to San Jose, CA. Not far from you and should be able to get them at a better price than anyone else. I just need to get 5-10 sets together, otherwise they won't give us a deep buyback.
I only know of two major distributors for Volk and am attempting to lasso both of them. Be patient for a few more days and hopefully I can help you out. I've been waiting a week already.
Thanks, Rishie
Automotive Research and Development
I love the SE 37's. A little better styling than the TE and just as light if not lighter in the 18,9.5 = 16lbs or so. Frikin' nuts man. I want this one. Good luck.
I only know of two major distributors for Volk and am attempting to lasso both of them. Be patient for a few more days and hopefully I can help you out. I've been waiting a week already.
Thanks, Rishie
Automotive Research and Development
I love the SE 37's. A little better styling than the TE and just as light if not lighter in the 18,9.5 = 16lbs or so. Frikin' nuts man. I want this one. Good luck.
#6
Junior Member
Join Date: Mar 2001
Location: Houston, Texas USA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
See if you can get some magnesium Volks... Those're baaaaaaddd....
------------------
Mods so far:
Big street port (Set up for single turbo…)/2mm Carbon Racing Apex Seals/1300cc Secondary Injectors/AST Eliminated/Non-Sequential Conversion/HKS Twin Power Ignition Amplifier/SR Downpipe/SR Midpipe/A’Pexi N1 Dual Exhaust/A’Pexi Power Intake/Big *** Spearco-Cored FMIC/GReddy Pulley Set/TIAL Blowoff Valve/GReddy Intercooler Pipes/ACT Racing Clutch w/ Stainless Clutch Line/Eibach ProKit Springs/R1 Front Strut Tower Brace/Cusco Carbon Fiber Rear Strut Brace/Cross-Drilled Stock Sized Rotors/Stainless Steel Brake Lines/A’pexi Power FC/A’Pexi AVC-R/A’Pexi EL Boost & EGT Gauges/’99 J-Spec Rear Spoiler/Dented Fender (Soon to be replaced…)I might’ve forgotten something…
[This message has been edited by Chaotica7 (edited May 18, 2001).]
------------------
Mods so far:
Big street port (Set up for single turbo…)/2mm Carbon Racing Apex Seals/1300cc Secondary Injectors/AST Eliminated/Non-Sequential Conversion/HKS Twin Power Ignition Amplifier/SR Downpipe/SR Midpipe/A’Pexi N1 Dual Exhaust/A’Pexi Power Intake/Big *** Spearco-Cored FMIC/GReddy Pulley Set/TIAL Blowoff Valve/GReddy Intercooler Pipes/ACT Racing Clutch w/ Stainless Clutch Line/Eibach ProKit Springs/R1 Front Strut Tower Brace/Cusco Carbon Fiber Rear Strut Brace/Cross-Drilled Stock Sized Rotors/Stainless Steel Brake Lines/A’pexi Power FC/A’Pexi AVC-R/A’Pexi EL Boost & EGT Gauges/’99 J-Spec Rear Spoiler/Dented Fender (Soon to be replaced…)I might’ve forgotten something…
[This message has been edited by Chaotica7 (edited May 18, 2001).]
#7
well, my cousin have a performance shop which could get vracing in a cheap price. On 18s, you probably looking around $550 with shipping, but that's not final, it could go less. Let me know the size that you need and I hook you up with the best price. By the way, this could be individual deal, doesn't have to be any min. order.
my email: cleung15@hotmail.com
my email: cleung15@hotmail.com
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
rx8volks
Canadian Forum
0
09-01-15 10:46 PM