verification with wide body fitment
#1
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Honolulu
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
verification with wide body fitment
Its been a while since Ive been on here.
I was hoping someone could help me verify my wheel offsets before I order them.
I have an FC with a wide body kit and coilovers. I did knock off the spring perch so the threaded collar sits on a tig'd bead on the front Koni inserts. I think that gives me more clearance up front.
The fenders are 32mm fronts and 50mm rears.
I want to fit the largest rim/tire combo I can.
I started from Teds FC3S pro numbers.
I think I can run a;
9.5 +20 as a squeeze up front with a 275
11.5 +0 with a 295 or 305 in the back.
Also is there any feasible alternatives to CCW for custom offsets. I think that 11.5+0 is gonna be impossible to just find.
Thanks and I appreciate any help!
Sky
I was hoping someone could help me verify my wheel offsets before I order them.
I have an FC with a wide body kit and coilovers. I did knock off the spring perch so the threaded collar sits on a tig'd bead on the front Koni inserts. I think that gives me more clearance up front.
The fenders are 32mm fronts and 50mm rears.
I want to fit the largest rim/tire combo I can.
I started from Teds FC3S pro numbers.
I think I can run a;
9.5 +20 as a squeeze up front with a 275
11.5 +0 with a 295 or 305 in the back.
Also is there any feasible alternatives to CCW for custom offsets. I think that 11.5+0 is gonna be impossible to just find.
Thanks and I appreciate any help!
Sky
#2
Rotary Enthusiast
iTrader: (66)
Join Date: Aug 2006
Location: where the wild things roam
Posts: 889
Likes: 0
Received 0 Likes
on
0 Posts
you may want to contact rich (username: goodfellaFD3S iirc from IRP) because hes a dealer for FIKSE, he's a mod in the 3rd gen Parts for sale forum so you can find him there if u dont already know him.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM