Uneven Ride Height- FC
#1
Losing Traction on 335s
Thread Starter
Join Date: May 2004
Location: NYC
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Uneven Ride Height- FC
Hello. I installed my GC strut sleeves, Koni Racing inserts, AWR roll center blocks, and a set of 6" springs on my FC. I have good clearance between the tire/frame on the driver's side, but the passenger's side is about an inch closer to the frame(way too close).
Anyone have any guesses why my car is 1" lower on the passenger's side? The springs are seated on both sides and nothing (as far as I can see) is binding/blocking either suspension arm. In addition, both strut sleeves have the strut mount bolts in the same spots and the threaded perch mounts are the same height on each strut sleeve.
Thanks
Ben
Anyone have any guesses why my car is 1" lower on the passenger's side? The springs are seated on both sides and nothing (as far as I can see) is binding/blocking either suspension arm. In addition, both strut sleeves have the strut mount bolts in the same spots and the threaded perch mounts are the same height on each strut sleeve.
Thanks
Ben
Thread
Thread Starter
Forum
Replies
Last Post
AMOC
SE RX-7 Forum
1
09-10-15 09:42 AM