Tokico Adjustables initial settings
Tokico Adjustables initial settings
I searched around and found info on a track set up but my question is who is using Tokico adjustables on the street and what were your settings (assuming you are using stock springs)?
Thanks for the help. I'll post the results after tweaking it around a little when I get things sorted out.
Thanks for the help. I'll post the results after tweaking it around a little when I get things sorted out.
I have the Eibach springs to go with my Illumina's, and I run 235/40/18 F and 275/35/18 R.
I set the fronts to 5 just so I don't scrub the crap out of the fender lining and fender edge. I set my rear to 3 (closest to stock imo)
Hope this helps a little
I set the fronts to 5 just so I don't scrub the crap out of the fender lining and fender edge. I set my rear to 3 (closest to stock imo)
Hope this helps a little
Originally posted by r0t0r-rooter
I have the Eibach springs to go with my Illumina's, and I run 235/40/18 F and 275/35/18 R.
I set the fronts to 5 just so I don't scrub the crap out of the fender lining and fender edge. I set my rear to 3 (closest to stock imo)
Hope this helps a little
I have the Eibach springs to go with my Illumina's, and I run 235/40/18 F and 275/35/18 R.
I set the fronts to 5 just so I don't scrub the crap out of the fender lining and fender edge. I set my rear to 3 (closest to stock imo)
Hope this helps a little
I have yous same exact suspension set-up and front tire size. I am thinking about buying new front tires size 245/35/18 w/ an Overall Diameter of 24.9" Exactly the same as stock.
235/40/18's are a half inch taller than stock @ 25.4"
The rubbing is driving me nuts!
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
82streetracer
1st Generation Specific (1979-1985)
7
Aug 23, 2015 09:28 AM
rx8volks
Canadian Forum
0
Aug 13, 2015 04:55 AM




