Tein HA springs, which are which?
#1
Z06 powered FD
Thread Starter
Join Date: Mar 2001
Location: Dallas, Texas
Posts: 1,883
Likes: 0
Received 0 Likes
on
0 Posts
Tein HA springs, which are which?
I'm assuming the J080-CEC are the fronts and the T100-CBC are the rears but can't figure anything out from the instructions.
Also, it shows the helper springs go under the main springs but all the pics I've seen on the net have the helper springs on top.
Thanks for any help
Also, it shows the helper springs go under the main springs but all the pics I've seen on the net have the helper springs on top.
Thanks for any help
#2
Rotary Enthusiast
iTrader: (1)
Helper springs on the bottom, take a close look at the pictures in the instructions.. you can tell which is which by the different shocks for front and rear, they number all the parts etc. It took me a few minutes after laying everything out and decifering the instructions.
Matt
Matt
#3
Z06 powered FD
Thread Starter
Join Date: Mar 2001
Location: Dallas, Texas
Posts: 1,883
Likes: 0
Received 0 Likes
on
0 Posts
Sorry I wasn't clear, I'm asking about the main springs. I have 2 different types of main springs and don't know which shocks they go on.
I figured since everyone has been installing these lately they would know.
I figured since everyone has been installing these lately they would know.
#4
Rotary Enthusiast
iTrader: (1)
Right, I know what you mean.. I think I just wrote it rather unclear now that I read it again. If I remember correctly the shorter/squatter of the two springs are the rears. What I meant by looking at the instructions is that it is easy to tell which shock if for the front and which is for the rear in the pictures, plus the front shock has the mouting tab for the brake line and the rear does not. Now looking at the instructions every part is labeled with a number, match the number labeling the spring for the rear shock to the number on the box that it came in.. I hope that makes more sense.
Matt
Matt
#6
Z06 powered FD
Thread Starter
Join Date: Mar 2001
Location: Dallas, Texas
Posts: 1,883
Likes: 0
Received 0 Likes
on
0 Posts
I must have gotten a set thats been sitting in a corner for a while or something. lol yes I took them out of the box and my boxes are not labled f/r. My instructions show nothing about which springs go on which shock and the springs are almost identical. The part numbers on the springs don't match the instructions either. And the springs and shocks came in different boxes.
Anyways I emailed Tein and they cleared it up for me, the T100 are the fronts.
Thanks
Anyways I emailed Tein and they cleared it up for me, the T100 are the fronts.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post