1ROTOR2NV

Guys please help i am hxupgrading my wheels and need to know exactly what offsets to get here. I wanna go with 10.5 wide in the rear and 9 wide in the front what offsets do i use to get the concave look wwith the te37's from volk? Also am i safe with a 285 out back with no lip roll, i am changing to smaller diameter coilovers? Pls help and also anyone with a pic of te37 on their car post it. thnx

drftwerks

iTrader: (1)

you wont get concave in an offset that will allow the 285 on stock unmodified fenders

1ROTOR2NV

what if i go with a narrower wheel out back and a 275

Josh18_2k

iTrader: (3)

275 barely fits with 35mm offset (roll the fender lip up, and run a little camber). dont go any higher, you'll hit the trailing arm. any lower and you'll need to work the fenders more to fit.
heres 285 on 17x10.5 +27 so you can see how it hits the fender (i'm guessing about 1 degree of camber in the pic). more camber in the back equals more clearance, but diminishes performance.

josh930

WOW, thats a tight fit^^^^

ARD T2

iTrader: (22)

Ok just to verify, do you have a FC?

FYI you don't have to get such wide wheels to get the concave look.

I believe they start in the low 20mm offset range for concaveness. Anything for a Z33 offset wise.

I can help you considering we're direct with volk. Just hit me up and we can go over your options and mods required.

Rishie