Suspension advice...
#1
Full Member
Thread Starter
Join Date: Jun 2002
Location: Del Rio TX
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Suspension advice...
I have a r1 with 42k original miles. Can I just get springs and what not instead of full coil-overs? What would be a good way to go? I read something about Sleepr1 talking about it but i cant find it again...soo..?
#3
Rotary Freak
iTrader: (22)
Yeah, depending on how low you want or what your needs are you can do one or both of these.
I'd suggest changing your struts before the springs. You can go Konis and stock springs. The Konis allow you to lower the front 10mm and 15mm in the rear I believe. If you want more then you can get the HR's which will be additional 1.25" drop.
If you want a similar ride and better handling then get the Konis and stay stock. You'll still be able to acheive a slightly lower stance.
That's what we recommend.
Rishie
I'd suggest changing your struts before the springs. You can go Konis and stock springs. The Konis allow you to lower the front 10mm and 15mm in the rear I believe. If you want more then you can get the HR's which will be additional 1.25" drop.
If you want a similar ride and better handling then get the Konis and stay stock. You'll still be able to acheive a slightly lower stance.
That's what we recommend.
Rishie
Thread
Thread Starter
Forum
Replies
Last Post