ssr comp
Trending Topics
Lives on the Forum
Joined: Sep 2001
Posts: 6,131
Likes: 2
From: IN
Aron,
Hey that's how my car used to look, only your car is "purtier" LOL
I put all the cool decals on my old Comps, since they were track wheels/tires at the time.
Fritz Flynn now owns my old Comps with Hoosiers LOL
Hey that's how my car used to look, only your car is "purtier" LOL
I put all the cool decals on my old Comps, since they were track wheels/tires at the time.
Fritz Flynn now owns my old Comps with Hoosiers LOL
Lives on the Forum
Joined: Sep 2001
Posts: 6,131
Likes: 2
From: IN
Originally posted by rynberg
Not bad, maintained the same weight with going taller and wider. They look good too! What offsets are those and what tire sizes? I'm assuming 245/40 and 265/40 S-03s?
Not bad, maintained the same weight with going taller and wider. They look good too! What offsets are those and what tire sizes? I'm assuming 245/40 and 265/40 S-03s?
Thread Starter
Rotary Enthusiast
Joined: Oct 2002
Posts: 806
Likes: 0
From: fly over state
I went with yoko avs es100 as they are $100 less a piece. 255/40/17 and 235/45/17
42mm front and rear. You cant really tell in the pic but the front spokes are flush with the edge of the rim and the rear spokes arch outward like the center has been pushed in.
I wanted to duplicate the look of the volks in that 350z add.
http://www.streetsports.com/Tune/350...ble%20Sets.htm
The vendor said the yokos didn't come in the wider width. Which is ok as I have a little more tire showing in the back end than I would like.
Now the question is do I leave my mazdaspeed hood carbon fiber to match the wheels or do I paint it.
www.atihun.com
42mm front and rear. You cant really tell in the pic but the front spokes are flush with the edge of the rim and the rear spokes arch outward like the center has been pushed in.
I wanted to duplicate the look of the volks in that 350z add.
http://www.streetsports.com/Tune/350...ble%20Sets.htm
The vendor said the yokos didn't come in the wider width. Which is ok as I have a little more tire showing in the back end than I would like.
Now the question is do I leave my mazdaspeed hood carbon fiber to match the wheels or do I paint it.
www.atihun.com
Last edited by keynote22; May 2, 2003 at 10:10 AM.
Lives on the Forum
Joined: Sep 2001
Posts: 6,131
Likes: 2
From: IN
Originally posted by keynote22
I went with yoko avs es100 as they are $100 less a piece. 255/40/17 and 235/45/17
The vendor said the yokos didn't come in the wider width. Which is ok as I have a little more tire showing in the back end than I would like.
Now the question is do I leave my mazdaspeed hood carbon fiber to match the wheels or do I paint it.
www.atihun.com
I went with yoko avs es100 as they are $100 less a piece. 255/40/17 and 235/45/17
The vendor said the yokos didn't come in the wider width. Which is ok as I have a little more tire showing in the back end than I would like.
Now the question is do I leave my mazdaspeed hood carbon fiber to match the wheels or do I paint it.
www.atihun.com
Thread Starter
Rotary Enthusiast
Joined: Oct 2002
Posts: 806
Likes: 0
From: fly over state
Ya I dont like the truck caps...I wish they had a flatter cap but the center nut pokes out past the wheel hub so I guess they need the room.
Thanks for the compliments. I waited until the revolution to make a wheel decision as I wanted to see on the wheels on everyones cars. It was these or the volks.
Thanks for the compliments. I waited until the revolution to make a wheel decision as I wanted to see on the wheels on everyones cars. It was these or the volks.
Lives on the Forum
Joined: Sep 2001
Posts: 6,131
Likes: 2
From: IN
ttpowered, the SSR Comps only come in 42 mm offset for 8.5 and 9.5 x 17 for FD Rx7. The other option is to go 9.5 x 18 with 50-mm offset all around with 265/35-18s. These will definitley clear the fender lips.
