Show me some pics for wheels to suit the Rx7?
#1
Junior Member
Thread Starter
Join Date: Sep 2005
Location: Australia
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Show me some pics for wheels to suit the Rx7?
Hey in the market for a new set of wheels, prefer deep dish. So I need some ideas and pics of wheels that would make it look awesome.
#3
Seismic Disturbance
iTrader: (29)
Wheels are a personal preference. 17s or 18s are best for FDs that are actually driven. "Fat chrome" or spinners are appropriate for an '84 Cutlass, not for an RX-7.
Just make sure the center bore is the correct size for the best wheel centering.
For an FD that's lowered about 2 inches in the front and 2-1/2 inches in the rear, you can go about a half inch wider toward the stock fender without cutting the tire over bumps. For the rear, you can go an inch wider toward the fender without problems.
-Josh
Just make sure the center bore is the correct size for the best wheel centering.
For an FD that's lowered about 2 inches in the front and 2-1/2 inches in the rear, you can go about a half inch wider toward the stock fender without cutting the tire over bumps. For the rear, you can go an inch wider toward the fender without problems.
-Josh
#5
Full Member
Join Date: Oct 2003
Location: Northern California
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by juicyjosh
Wheels are a personal preference. 17s or 18s are best for FDs that are actually driven. "Fat chrome" or spinners are appropriate for an '84 Cutlass, not for an RX-7.
-Josh
-Josh
Thread
Thread Starter
Forum
Replies
Last Post