Rear koni shock install question
Thread Starter
Joined: Apr 2007
Posts: 290
Likes: 1
From: Fort McMurray, AB
Rear koni shock install question
Hey guys,
I went to install my koni ground control coilover today for the rear and i noticed a gap of about 1/4" or so between the control arm bushing and the strut mount. Now i know once centered its about 1/8" or 3/16" or so on either side but is this normal? Like can the strut mount fork be pushed together when the nut is torqued?
Any feedback is appreciated.
Eddie
I went to install my koni ground control coilover today for the rear and i noticed a gap of about 1/4" or so between the control arm bushing and the strut mount. Now i know once centered its about 1/8" or 3/16" or so on either side but is this normal? Like can the strut mount fork be pushed together when the nut is torqued?
Any feedback is appreciated.
Eddie
Thread Starter
Joined: Apr 2007
Posts: 290
Likes: 1
From: Fort McMurray, AB
Well the fork actually do bend in and also goes back to normal when the nut is backed off again. I notice the fork definitely has thicker metal which takes away from the nut thread.