can anyone tell me the points to place the lift brackets (four point hyd. lift)

on 94 rx7 tt?

thanks.

 

On my 93 i used the seems that stick down under the car right under the rockers. they are the seems that the scissor jack is supposed to co around. pretty straight forward.

 

I also use the factory jack locations for the lift arms.

I usually put a small 2X4 block between the car and the lift just so it doesn't damage the seam as much. Just make sure the wood grain is running the correct location or you'll split the wood and get a good surprise.

 

got it. thanks. had to lift before shop flooded!