Post Pics of your FD Wheel Fitment!!
#2253
Make an assessment...
iTrader: (3)
I would think wear on the bearing would be more determined by where the majority of the wheel is in regards to the bearing. My wheel is 11.5" wide so it still is inward in the wheel well, kinda wrapped around the wheel bearing if that makes sense. Whereas if the wheel was pushed way out and the inner part of the wheel was out closer in line with the wheel bearing it might be a problem. At least that's what I've always thought. I could be wrong. Or maybe it's crazy camber that does damage, I don't know lol.
#2254
18x8/9.5 +45 Rays Engineering/Volk Racing GRA Evolution 4
I just got these for a set of track wheels, can't wait to fit them. I don't know much about them but they're light as all getout, I think 18lbs/ea on the fronts. The sticker says 1994. Any info on them? Also included a pic of my car with the street wheels 18x8.5/9.5.
#2260
Rotary Enthusiast
iTrader: (3)
17x9 +0 18x9.5 +22 Double Staggered Mag Blue Volk TE 37,s 215/45/17 275/35/18 fenders rolled to the max
TE37
DSC02466 by carlukok, on Flickr
url=http://www.flickr.com/photos/67505571@N02/9766094675/][/url]
DSC02473 by carlukok, on Flickr
url=http://www.flickr.com/photos/67505571@N02/9766065505/][/url]
DSC02485 by carlukok, on Flickr
url=http://www.flickr.com/photos/67505571@N02/9766108906/][/url]
DSC02463 by carlukok, on Flickr
url=http://www.flickr.com/photos/67505571@N02/9765867972/][/url]
DSC02482 by carlukok, on Flickr
TE37
DSC02466 by carlukok, on Flickr
url=http://www.flickr.com/photos/67505571@N02/9766094675/][/url]
DSC02473 by carlukok, on Flickr
url=http://www.flickr.com/photos/67505571@N02/9766065505/][/url]
DSC02485 by carlukok, on Flickr
url=http://www.flickr.com/photos/67505571@N02/9766108906/][/url]
DSC02463 by carlukok, on Flickr
url=http://www.flickr.com/photos/67505571@N02/9765867972/][/url]
DSC02482 by carlukok, on Flickr
#2262
Senior Member
iTrader: (3)
Thanks !,
I,m not running any camber up front at all,I have a skinny 215 tire so that helps.
Car has been in the shop for a eternity chasing down some electrical gremlins and just for fun I have a 225 tire up front to test (17 x 9 with zero offset wheel) and just by eye it would need some camber to get it to fit.It would be ideal to get a bit more tire under there so we will see.
Its on Tein coilovers and its adjusted almost to the lowest setting
I,m not running any camber up front at all,I have a skinny 215 tire so that helps.
Car has been in the shop for a eternity chasing down some electrical gremlins and just for fun I have a 225 tire up front to test (17 x 9 with zero offset wheel) and just by eye it would need some camber to get it to fit.It would be ideal to get a bit more tire under there so we will see.
Its on Tein coilovers and its adjusted almost to the lowest setting
#2263
Rotary Enthusiast
iTrader: (3)
Thanks !,
I,m not running any camber up front at all,I have a skinny 215 tire so that helps.
Car has been in the shop for a eternity chasing down some electrical gremlins and just for fun I have a 225 tire up front to test (17 x 9 with zero offset wheel) and just by eye it would need some camber to get it to fit.It would be ideal to get a bit more tire under there so we will see.
Its on Tein coilovers and its adjusted almost to the lowest setting
I,m not running any camber up front at all,I have a skinny 215 tire so that helps.
Car has been in the shop for a eternity chasing down some electrical gremlins and just for fun I have a 225 tire up front to test (17 x 9 with zero offset wheel) and just by eye it would need some camber to get it to fit.It would be ideal to get a bit more tire under there so we will see.
Its on Tein coilovers and its adjusted almost to the lowest setting
so no camber in the front or the back with 17x9 +0 18x9.5 +22 Double Staggered Mag Blue Volk TE 37,s 215/45/17 275/35/18 ?!( assuming you have stock camber specs).
that is great news!
The following users liked this post:
Twofer (06-13-22)
#2271
FD + 2JZGTE = WIN! **D
iTrader: (19)
I'm searching the thread but could use some immediate input if anyone can help.
I am about to put on some 18x10.5 +15's all around. My fenders are pulled and rolled. Would 265/35's fit all around without issue? If not, what would you guys recommend? I'm open to suggestions. I do have Shine Auto Burnout widebody fenders on stand-by. It's looking like I might need to accelerate the install plans.. lol
For reference, I successfully ran 275/35/18's on my stock (rolled/pulled) fenders with 18x9.5 +35 all around and I still had full steering radius. Just occasional rubbing except against low-hanging fender liner bits.
I am about to put on some 18x10.5 +15's all around. My fenders are pulled and rolled. Would 265/35's fit all around without issue? If not, what would you guys recommend? I'm open to suggestions. I do have Shine Auto Burnout widebody fenders on stand-by. It's looking like I might need to accelerate the install plans.. lol
For reference, I successfully ran 275/35/18's on my stock (rolled/pulled) fenders with 18x9.5 +35 all around and I still had full steering radius. Just occasional rubbing except against low-hanging fender liner bits.
Last edited by YoshiFD3S; 09-27-16 at 07:43 PM.
#2272
half ass 2 or whole ass 1
iTrader: (114)
according to this (i input your measurements already so all you have to do is click on the link)
Online Wheel and Tyre Fitment Calculator. Offset, Tyre Stretch and Speedo Error | Will They Fit
Compared to your existing wheel, this new wheel will have an inner rim which is 7.3mm further away from the suspension strut. The outer rim will poke out 32.7mm more than before.
Online Wheel and Tyre Fitment Calculator. Offset, Tyre Stretch and Speedo Error | Will They Fit
Compared to your existing wheel, this new wheel will have an inner rim which is 7.3mm further away from the suspension strut. The outer rim will poke out 32.7mm more than before.
#2273
#2275
Make an assessment...
iTrader: (3)
I'm searching the thread but could use some immediate input if anyone can help.
I am about to put on some 18x10.5 +15's all around. My fenders are pulled and rolled. Would 265/35's fit all around without issue? If not, what would you guys recommend? I'm open to suggestions. I do have Shine Auto Burnout widebody fenders on stand-by. It's looking like I might need to accelerate the install plans.. lol
For reference, I successfully ran 275/35/18's on my stock (rolled/pulled) fenders with 18x9.5 +35 all around and I still had full steering radius. Just occasional rubbing except against low-hanging fender liner bits.
I am about to put on some 18x10.5 +15's all around. My fenders are pulled and rolled. Would 265/35's fit all around without issue? If not, what would you guys recommend? I'm open to suggestions. I do have Shine Auto Burnout widebody fenders on stand-by. It's looking like I might need to accelerate the install plans.. lol
For reference, I successfully ran 275/35/18's on my stock (rolled/pulled) fenders with 18x9.5 +35 all around and I still had full steering radius. Just occasional rubbing except against low-hanging fender liner bits.
Just by looking at the pic I'd say yes. Unless the tires rolled them for him haha.