Spintriangles nice fitment! What turn signal do you have??

 

what its the spek of the wheels?

 

what’s the wheel specs?

 

Wheel spec are 18inch 9.5 fronts 38 offset and backs are 18inch 10 with 35 offs




et. There is also a build thread on my car. 93 rx7 Improving a great sports car

 

For those of us searching, it would be nice if you could answer the question, or if someone could chime in. Currently looking at the possibility of running 10 +38 up fronts.

 

I have 9.5 /38 fronts and I would not run 10 inch wheel. I had to roll my fronts just to do the 9.5.

 

Already have the fenders rolled, so that not a problem. Just looking for some simplicity with running 10's square if it is possible.

Thanks for the input though!

 

I think a 9.5 with a 255 was already stretching it. If you do it let me know how it goes. I would also love to see if a square setup works.

 

i'll report back if I can track anymore info down

It all should be in here https://www.rx7club.com/suspension-w...ide-fd-892901/

Go down to post 121 and 123. Should answer our question.

 

https://www.rx7club.com/attachments/...s-dsc06462.jpg

18x10 +38 all around. 265/35/18 tires.

I am currently running 18x11.5 with 285 tires with +42.7mm offset. Enkei NT03.

 

@briansfd , I'm currently running front Fikse wheels 18x9.5 plus 33 with a 255/35 tire with rolled fenders, and IMO it's about as flush as I'm comfortable going on a street car.

This setup yields 87.65mm frontspacing, and your proposed setup is 89mm...... assume you're going to run a 255/35 tire? If so, you 'should' be ok

 

Hey Goodfella, Thanks for the feedback. Yes, youre right, currently looking at 255/35's. Current plan is to get the 10's for fall, hopefully I can report back then.