When it comes to wheels I'm confused as hell, I did some research to see that the bolt patterns match but I wanted to double check with the wheel gurus to make sure:

# (2) 18 X 8.0 (front)
# (2) 18 X 9.0 (rear)
# Offset: +48 (front)
# Offset: +50 (rear)
# Bolt pattern: 5h x 114.3

I'm currently running SSR wheels which came with the car when I purchased it but they seem a bit too narrow for my taste 17 x 8.0 front and rear. What would be the correct width to get for the wheels to meet the body line so I don't look like a toy car with a cover top running on chassis

 

Those'll fit .
The stock FD wheels are 16x8 with a +50 offset.

 

thanks for the quick reply, hmmm since the stocks are 16 x 8, looks like I should be needing 18 x 9 front and 18 x 10 rear for it to meet the fender edge?

 

If you are looking for the "flush" look, you are going to have to get more aggressive with the offsets. You could probably do a +42 to +44 with the 18x10 in the rear. In the front, the 18x9, would probably need to be around a +38 for a "flush" look. I have a pic of my car with 17x9 +43 (front and back):

https://www.rx7club.com/vbgarage.php...ype=im&id=6597

That will give you an idea.

 

ty Mahjik that is exactly the word i was looking for "flush" haha